Waste printed circuit boards (WPCBs) – a common type of ewaste consisting of electronic components with a significant amount of rare and precious metals as well as glass fiber composites. The development of WPCB retreatment technology through mechanical methods, resulting in metallic and nonmetallic waste fractions, can be efficiently classified as enriched concentrate. The research presented in this paper highlights the potential trends for recycling WPCBs. The integration of impact milling for WPCBs is a promising technology for the partitioning and fragmentation of different components and for the separation of fractions. The mechanical sizereduction and separation technology of precrushed WPCBs, using direct and separative disintegrator milling, has been compared with other technologies (hammer milling and high voltage fragmentation). The main parameters, such as the specific energy (ES) of WPCB treatment and the rate of separation of different phases, were studied. As preliminary results show the optimal parameters of partitioning of the metallic and nonmetallic parts, fragmentation and delamination (specific energy of treatment and rate of separation) by disintegrator milling were proposed.
1. Duan, C., Wen, X., Shi, C., Zhao, Y., Wen, B. and He, Y. Recovery of metals from waste printed circuit boards by a mechanical method using a water medium. J. Hazard. Mater., 2009, 166(1), 478–482.
https://doi.org/10.1016/j.jhazmat.2008.11.060
2. Mekhanobr Tekhnika.
https://en.mtspb.com/product/waste-processing-solutions/weee/ (accessed 2023-02-10).
3. Stokkermill.
https://www.stokkermill.com/recycling-machines/pcb-boards-recycling (accessed 2023-02-13).
4. Henan Doing.
https://www.copperwirerecyclingmachinery.com/print_circuit_board_recycling_machine/ (accessed 2023-03-28).
5. Selfrag.
https://www.selfrag.com/high-voltage-pulse-power-solutions (accessed 2023-03-31).
6. Wang, E., Shi, F. and Manlapig, E. Mineral liberation by high voltage pulses and conventional comminution with same specific energy levels. Miner. Eng., 2012, 27–28, 28–36.
https://doi.org/10.1016/j.mineng.2011.12.005
7. Martino, R., Iseli, C., Gaydardzhiev, S., Streicher-Porte, M. and Weh, A. Electrodynamic fragmentation of printed wiring boards as a preparation tool for their recycling. Miner. Eng., 2017, 107, 20–26.
https://doi.org/10.1016/j.mineng.2017.01.009
8. Luyima, A., Zhang, L., Kers, J. and Laurmaa, V. Recovery of metallic materials from printed wiring boards by green pyrolysis process. Mater. Sci., 2012, 18(3), 238−242.
https://doi.org/10.5755/J01.MS.18.3.2432
9. Zuo, X., Damoah, L. N. W., Zhang, L., Schuman, T. and Kers, J. Green pyrolysis of used printed wiring board powders. In: Recycling of Electronic Waste II: Proceedings of the Second Symposium (Zhang, L. and Krumdick, G. K., eds). Hoboken, New Jersey, USA, 2011, 17−24.
https://doi.org/10.1002/9781118086391.ch3
10. Goljandin, D. and Kulu, P. Disintegrators and Disintegrator Treatment of Materials. LAP LAMBERT Academic publishing, Saarbrücken, Germany, 2015.
11. Sagarov, A. Sustainable recycling of printed circuit boards: recovery improvement and process waste reduction. Master’s thesis. Chalmers University of Technology, Sweden, 2020.
