The Nordtest method evaluates the moisture buffer value (MBV) of materials that are being exposed to indoor air. The test simulates daily variations (high RH of 75% for 8 hours, low RH of 33% for 16 hours) in MBV, which in this context refers to the moisture uptake/release in the material when it is exposed to relative humidity (RH) in a square wave. We are looking for ways to increase clay plaster’s ability to buffer moisture. Which material has simultaneously a higher ability to buffer moisture and can be added to the clay plaster mixture? The recipe for the specimen included the following: waste paper (newspaper paper), glue (methylcellulose), clay and water. Our research showed that adding paper plaster mixture to the clay plaster mixture increases the moisture buffering ability of the plaster. The bigger the amount of added paper plaster, the better the plaster’s ability to buffer moisture.
Abadie, M. O. and Mendonça, K. C. Moisture performance of building materials: from material characterization to building simulation using the Moisture Buffer Value concept. Build. Environ., 2009, 44(2), 388–401.
https://doi.org/10.1016/j.buildenv.2008.03.015
Altmäe, E., Ruus, A., Raamets, J., and Tungel, E. Determination of Clay-Sand Plaster Hygrothermal Performance: Influence of Different Types of Clays on Sorption and Water Vapour Permeability. In Proceedings of the 9th International Cold Climate Conference: Sustainable new and renovated buildings in cold climates, Kiruna, Sweden, March 12–15, 2018 (Johansson, D., Bagge, H., and Wahlström, Å., eds). Springer Proceedings in Energy, Springer, Cham, 2018, 945−955.
https://link.springer.com/chapter/10.1007/978-3-030-00662-4_80
https://doi.org/10.1007/978-3-030-00662-4_80
Janssen, H. and Roels, S. Qualitative and quantitative assessment of interior moisture buffering by enclosures. Energy Build., 2009, 41(4), 382–394.
https://doi.org/10.1016/j.enbuild.2008.11.007
Maddison, M, Mauring, T, Kirsimäe, K, and Mander, Ü. The humidity buffer capacity of clay-sand plaster filled with phytomass from treatment wetlands. Build. Environ., 2009, 44(9), 1864–1868.
https://doi.org/10.1016/j.buildenv.2008.12.008
Osanyintola, O. F. and Simonson, C. J. Moisture buffering capacity of hygroscopic building materials: Experimental facilities and energy impact. Energy Build., 2006, 38(10), 1270–1282.
https://doi.org/10.1016/j.enbuild.2006.03.026
Padfield T. The role of absorbent building materials in moderating changes of relative humidity. PhD thesis. Technical University of Denmark, Lyngby, 1998.
Rode, C. and Grau, K. Moisture buffering and its consequence in whole building hygrothermal modeling. J. Build. Phys., 2008, 31(4), 333–360.
https://doi.org/10.1177/1744259108088960
Rode, C., Peuhkuri, R., Time, B., Svennberg, K., and Ojanen, T. Moisture buffer value of building materials. J. ASTM Int., 2007, 4(5), 1–12.
https://doi.org/10.1520/JAI100369
Rode, C. Moisture buffering of building materials. BYG DTU-126 Report. Department of Civil Engineering, Technical University of Denmark, Kongens Lyngby, 2005.
Svennberg, K. Moisture Buffering in the Indoor Environment. PhD thesis. Lund University, Lund, 2006.
Zhang, M., Qin, M., and Chen, Z. Moisture buffer effect and its impact on indoor environment. Procedia Eng., 2017, 205, 1123–1129.
https://doi.org/10.1016/j.proeng.2017.10.417
Vares, O., Ruus, A., Raamets, J., and Tungel, E. Determination of hygrothermal performance of clay-sand plaster: influence of covering on sorption and water vapour permeability. Energy Procedia, 2017, 132, 267–272.
https://doi.org/10.1016/j.egypro.2017.09.719
Wilkinson, S. A study of the moisture buffering potential of hemp in combination with lime and clay-based binders. MSc thesis. University of East London, London, 2009.
Stevulova, N., Schwarzová, I., Hospodárova, V., and Junak, J. Implementation of waste cellulosic fibres into building materials. Chem. Eng. Trans., 2016, 50, 367–372.
http://doi.org/10.3303/
