The main goal of the study is to develop the concept of the real time monitoring system for manufacturing processes of photovoltaic modules. Driven by reduced costs the solar power generation is growing rapidly and increases the number of photovoltaic modules being delivered to the customers. Automatic and early detection of defects/shortcomings reduces production costs and increases productivity. This paper is focused on detecting main issues, influencing performance of the manufacturing process of photovoltaic modules. Parameters that need to be monitored will be proposed in order to eliminate the faults. The main impact factors are analysed.
1. Graus, W. and Worrell, E. Trend in efficiency and capacity of fossil power generation in the EU. Energy Policy, 2009, 37(6), 2147‒2160.
https://doi.org/10.1016/j.enpol.2009.01.034
2. Clover, I. and Tsagas, I. Europe added 8.61 GW of solar in 2017 with Turkey taking top spot. PV Mag., 2018. https://www.pv-magazine.com/2018/02/09/europe-added-8-61-gw-of-solar-in-2017-with-turkey-taking-top-spot/
3. Silvestre, S., Tahri, A., Tahri, F., Benlebna, S., and Chouder, A. Evaluation of the performance and degradation of crystalline silicon-based photovoltaic modules in the Saharan environment. Energy, 2018, 152, 57‒63.
https://doi.org/10.1016/j.energy.2018.03.135
4. Photovoltaics report. Fraunhofer Institute for Solar Energy Systems, ISE with support of PSE Conferences & Cosulting GmBH. 2018 (accessed 2018-02-26). https://www.ise.fraunhofer.de/content/dam/ise/de/documents/publications/studies/Photovoltaics-Report.pdf
5. Shi, Z. and Jayatissa, A. H. Perovskites-Based Solar Cells: A Review of Recent Progress, Materials and Processing Methods. Materials (Basel), 2018, 11(5), 729.
https://doi.org/10.3390/ma11050729
6. Juntunen, M. A., Heinonen, J., Vähänissi, V., Repo, P., Valluru, D., and Savin, H. Near-unity quantum efficiency of broadband black silicon photodiodes with an induced junction. Nat. Photonics, 2016, 10 (12), 777‒781.
https://doi.org/10.1038/nphoton.2016.226
7. Abdelkader, E. A., Mahrane, A., Moussa, F. Y., and Boukennous, Y. Solar Module Fabrication. Int. J. Photoenergy, 2007. http://downloads.hindawi.com/journals/ijp/2007/027610.pdf https://www.researchgate.net/publication/26488380_Solar_Module_Fabrication
https://doi.org/10.1155/2007/27610
8. Honsberg, C. and Bowden, S. Module Materials. http: //www.pveducation.org/pvcdrom/modules/module-materials (accessed 2018-12-12).
9. Perret-Aebi, L.-E., Li, H.-Y., Théron, R., Roeder, G., Luo, Y., Turlings, T., Lange, R. F. M., and Ballif, C. Insights on EVA lamination process: Where do the Bubbles Come From? In Proceedings of the 25th European Photovoltaic Solar Energy Conference and Exhibition /5th World Conference on Photovoltaic Energy Conversion, Valencia, Spain, September 6‒10, 2010. https://www.researchgate.net/publication/47806645_Insights_on_EVA_lamination_process_Where_do_the_bubbles_come_from
10. Meyer, S., Turek, M., Großer, S., Manke, T., and Hagendorf, C. Understanding snail trails on PV modules. PV Tech, 2017, 10, 60‒64.
11. Zhou, S., Ling, W., and Peng, Z. An RFID-based Remote Monitoring System for Enterprise Internal Production Management. Int. J. Adv. Manuf. Technol., 2007, 33(7‒8), 837‒844.
https://doi.org/10.1007/s00170-006-0506-6
12. Herranen, H. Design Optimization of Smart Composite Structures with Embedded Devices. TUT Press, Tallinn, 2014.
13. Herranen, H., Majak, J., Tšukrejev, P., Karjust, K., and Märtens, O. Design and manufacturing of composite laminates with structural health monitoring capabilities. Procedia CIRP, 2018, 72, 647−652.
https://doi.org/10.1016/j.procir.2018.03.128
14. Aruniit, A., Kers, J., Goljandin, D., Saarna, M., Tall, K., Majak, J., and Herranen, H. Particulate Filled Composite Plastic Materials from Recycled Glass Fibre Reinforced Plastics. Mat. Science, 2011, 17(3), 1–6.
https://doi.org/10.5755/j01.ms.17.3.593
15. Majak, J., Pohlak, M., Eerme, M., and Velsker, T. Design of car frontal protection system using neural networks and genetic algorithm. Mechanika, 2012, 18(4), 453−460.
https://doi.org/10.5755/j01.mech.18.4.2325
16. Lellep, J. and Majak, J. Nonlinear constitutive behavior of orthotropic materials. Mech. Compos. Mater., 2000, 36(4), 261−266.
https://doi.org/10.1007/BF02262803
17. Karjust, K., Pohlak, M., and Majak, J. Technology Route Planning of Large Composite Parts. Int. J. Mater. Form., 2010, 3(1), 631−634.
https://doi.org/10.1007/s12289-010-0849-2
18. Eiskop, T., Snatkin, A., and Karjust, K. Production monitoring system with predictive functionality. J. Eng. Sci. Technol., 2017, 12(9), 2410−2425.
19. Prasad, H. C. S., Rao, P. S., Gopala Krishna, B., and Ahluwalia, A. Productivity enhancement through production monitoring system. Int. J. Appl. Bus. Econ. Res., 2016, 14(3), 1755‒1767.
20. Kaganski, S., Majak, J., Karjust, K., and Toompalu, S. Implementation of key performance indicators selection model as part of the Enterprise Analysis Model. Procedia CIRP, 2017, 63, 283−288.
https://doi.org/10.1016/j.procir.2017.03.143
21. Sell, R., Coatanéa, E., and Christophe, F. Important aspects of early design in mechatronic. In Proceedings of the 6th International DAAAM Baltic Conference "Industrial Engineering", Tallinn, Estonia, April 24‒26, 2008. http://innomet.ttu.ee/daaam08/Online/Design%20Engineering/Coatanea-Sell.pdf
22. Sell, R., Aryassov, G., Petritshenko, A., and Kaeeli, M. Kinematics and dynamics of configurable wheel-leg. In Proceedings of the 8th International DAAAM Baltic Conference "Industrial Engineering", Tallinn, Estonia, April 19‒21, 2012, 345‒350. http://innomet.ttu.ee/daaam_publications/2012/sell.pdf
23. Polyantchikov, I., Shevtshenko, E., Karaulova, T., Kangilaski, T., and Camarinha-Matos, L. M. Virtual enterprise formation in the context of a sustainable partner network. Ind. Manage. Data Syst., 2017, 117(7), 1446–1468.
https://doi.org/10.1108/IMDS-07-2016-0274
24. Mahmood, K., Karaulova, T., Otto, T., and Shevtshenko, E. Performance Analysis of a Flexible Manufacturing System (FMS). Procedia CIRP, 2017, 63, 424‒429.
https://doi.org/10.1016/j.procir.2017.03.123
