ESTONIAN ACADEMY
PUBLISHERS
eesti teaduste
akadeemia kirjastus
PUBLISHED
SINCE 1952
 
Proceeding cover
proceedings
of the estonian academy of sciences
ISSN 1736-7530 (Electronic)
ISSN 1736-6046 (Print)
Impact Factor (2020): 1.045

Vol 68, Issue 2, 2019
Selected papers of the international conference \'Modern Materials and Manufacturing 2019\' (MMM2019)

Preface; p. 125
Priit Kulu
Full article in PDF format | Abstract, References in HTM format

Mechanical and tribological properties of 100-nm thick alumina films prepared by atomic layer deposition on Si(100) substrates; pp. 126–130
Asad Alamgir, Andrei Bogatov, Maxim Yashin, Vitali Podgursky
Full article in PDF format | Abstract, References in HTM format

Production of metal–ceramic lattice structures by selective laser melting and carburizing or nitriding; pp. 131–139
Yaroslav Holovenko, Lauri Kollo, Marek Jõeleht, Roman Ivanov, Tetiana Soloviova, Renno Veinthal
Full article in PDF format | Abstract, References in HTM format

Spark plasma sintering of layered γ-Al2O3/graphene reinforced nanocomposites; pp. 140–144
Ali Saffar Shamshirgar, Roman Ivanov, Irina Hussainova
Full article in PDF format | Abstract, References in HTM format

Magnesite-rich mining tailings as a raw material for refractory ceramics – microstructural and thermal analysis; pp. 145–149
Marjaana Karhu, Juha Lagerbom, Soili Solismaa, Elina Huttunen-Saarivirta
Full article in PDF format | Abstract, References in HTM format

Study of submerged and plasma arc welded composite hardfacings with a novel Cr3C2–Ni reinforcement; pp. 150–157
Regita Bendikiene, Antanas Ciuplys, Simonas Mindaugas Jankus, Andrei Surzhenkov, Dmytro Tkachivskyi, Kristjan Juhani, Mart Viljus, Rainer Traksmaa, Maksim Antonov, Priit Kulu
Full article in PDF format | Abstract, References in HTM format

Advanced sensing materials based on molecularly imprinted polymers towards developing point-of-care diagnostics devices; pp. 158–167
Anna Kidakova, Jekaterina Reut, Roman Boroznjak, Andres Öpik, Vitali Syritski
Full article in PDF format | Abstract, References in HTM format

Photocatalytic properties of TiO2 nanostructures of different morphology modified with various modifiers; pp. 168-177
Reinis Drunka, Janis Grabis, Dzidra Jankovica, Dzintra-Arija Rasmane, Aija Krumina
Full article in PDF format | Abstract, References in HTM format

Tribological synergy between classical ZDDP and innovative MoS2 and MoO3 nanotube additives at elevated temperatures; pp. 178-184
Agnieszka Maria Tomala, Manel Rodríguez Ripoll, Remigiusz Michalczewski
Full article in PDF format | Abstract, References in HTM format

Bioceramic scaffolds by additive manufacturing for controlled delivery of the antibiotic vancomycin; pp. 185–190
Nikhil Kamboj, Miguel A. Rodríguez, Ramin Rahmani, Konda Gokuldoss Prashanth, Irina Hussainova
Full article in PDF format | Abstract, References in HTM format

Modelling of impact-abrasive wear of ceramic, metallic, and composite materials; pp. 191-197
Ramin Rahmani, Maksim Antonov, Nikhil Kamboj
Full article in PDF format | Abstract, References in HTM format

Wear of potential tool materials for aluminium alloys friction stir welding at weld temperatures; pp. 198-206
Mart Kolnes, Jakob Kübarsepp, Fjodor Sergejev, Märt Kolnes
Full article in PDF format | Abstract, References in HTM format

Graphene/SiC dies for electrochemical blood-type sensing; pp. 207–213
Alexander Usikov, Konstantin Borodkin, Sergey Novikov, Alexander Roenkov, Andrei Goryachkin, Mikhail Puzyk, Iosif Barash, Sergey Lebedev, Alexander Zubov, Yuri Makarov, Alexander Lebedev
Full article in PDF format | Abstract, References in HTM format

Comparison of the biomechanics and fixation index of crosslinking between lysyl oxidase and genipin on guinea pig sclera, an animal model of defocus-induced high myopia; pp. 214–221
Min Wang, Zhikuan Yang, Ruiqin Li, Hua Fan, Yu Liu
Full article in PDF format | Abstract, References in HTM format