Circular economy is still a theoretical field. In this research, alumina ceramic material was used to measure the coefficient of friction (COF) of cotton fabric with the objective of supporting the circular economy of textile industries. A scanning electron microscope (SEM), optical profilometer, mechanical profilometer and tribometer were used for evaluations of the cotton fabric surface and the coefficient of friction (COF). The cotton fabric surface was detected rough and damaged while the ceramic balls displayed smoothness along with high microhardness. The dynamic COF values were 0.12 to 0.15 in warp and 0.11 to 0.17 in weft directions. Based on the COF values, deformation, wear and morphologies evaluations, alumina ceramic materials could be used operationally for surface alterations of textile machinery parts. The results could also enhance the quality and performance of textile products.
1. MacArthur, E. Towards the circular economy, economic and business rationale for an accelerated transition. Report. Ellen MacArthur Foundation, Cowes, UK, 2013, 21–34.
2. Hussain, A., Kamboj, N., Podgurski, V., Antonov, M. and Goliandin, D. Circular economy approach to recycling technologies of post-consumer textile waste in Estonia: a review. Proc. Est. Acad. Sci., 2021, 70(1), 80–90.
https://doi.org/10.3176/proc.2021.1.07
3. Cremer, R., Reichert, K., Neuschütz, D., Erkens, G. and Leyendecker, T. Sputter deposition of crystalline alumina coatings. Surf. Coat. Technol., 2003, 163–164, 157–163.
https://doi.org/10.1016/S0257-8972(02)00480-2
4. Bobzin, K., Lugscheider, E., Maes, M. and Piñero, C. Relation of hardness and oxygen flow of Al2O3 coatings deposited by reactive bipolar pulsed magnetron sputtering. Thin Solid Films, 2006, 494(1–2), 255–262.
https://doi.org/10.1016/j.tsf.2005.08.162
5. Alami, J. Plasma characterization & thin film growth and analysis in highly ionized magnetron sputtering. PhD thesis. Linköping University, Sweden, 2005.
6. Merlo, A. M. The contribution of surface engineering to the product performance in the automotive industry. Surf. Coat. Technol., 2003, 174–175, 21–26.
https://doi.org/10.1016/S0257-8972(03)00371-2
7. Ernst, P. and Barbezat, G. Thermal spray applications in powertrain contribute to the saving of energy and material resources. Surf. Coat. Technol., 2008, 202(18), 4428– 4431.
https://doi.org/10.1016/j.surfcoat.2008.04.021
8. Donnet, C. and Erdemir, A. Historical developments and new trends in tribological and solid lubricant coatings. Surf. Coat. Technol., 2004, 180–181, 76–84.
https://doi.org/10.1016/j.surfcoat.2003.10.022
9. Tian, X., Yan, K., Zhao, J., Cheng, Y. and Wang, Z. Thermal and mechanical shock resistances of Si3N4/(W, Ti) C graded nano-composite ceramic tool material. Ceram. Int., 2020, 46(2), 2317–2324.
https://doi.org/10.1016/j.ceramint.2019.09.222
10. Birol, Y. Sliding wear of CrN, AlCrN and AlTiN coated AISI H13 hot work tool steels in aluminium extrusion. Tribol. Int., 2013, 57, 101–106.
https://doi.org/10.1016/j.triboint.2012.07.023
11. Chu, K., Shum, P. W. and Shen, Y. Substrate bias effects on mechanical and tribological properties of substitutional solid solution (Ti, Al) N films prepared by reactive magnetron sputtering. Mater. Sci. Eng. B, 2006, 131(1–3), 62–71.
https://doi.org/10.1016/j.mseb.2006.03.036
12. Shum, P. W., Tam, W. C., Li, K. Y., Zhou, Z. F. and Shen, Y. G. Mechanical and tribological properties of titanium–aluminium–nitride films deposited by reactive close-field unbalanced magnetron sputtering. Wear, 2004, 257(9–10), 1030–1040.
https://doi.org/10.1016/j.wear.2004.07.014
13. Darden, M. A. and Schwartz, C. J. Investigation of skin tribology and its effects on the tactile attributes of polymer fabrics. Wear, 2009, 267(5–8), 1289–1294.
https://doi.org/10.1016/j.wear.2008.12.041
14. Frącczak, Ł., Matusiak, M. and Zgórniak, P. Investigation of the friction coefficient of Seersucker woven fabrics. Fibres Text. East. Eur., 2019, 27, 3(135), 36–42.
https://doi.org/10.5604/01.3001.0013.0740
15. Bueno, M. A., Lamy, B., Renner, M. and Viallier-Raynard, P. Tribological investigation of textile fabrics. Wear, 1996, 195(1–2), 192–200.
https://doi.org/10.1016/0043-1648(95)06848-1
16. Tang, K.-p. M., Kan, C.-w. and Fan, J.-t. Assessing and predicting the subjective wetness sensation of textiles: subjective and objective evaluation. Text. Res. J., 2014, 85(8), 838–849.
https://doi.org/10.1177/0040517514555799
17. Hearle, J. W. S., Lomas, B. and Cooke, W. D. Atlas of Fibre Fracture and Damage to Textiles. Woodhead Publishing, 1998.
https://doi.org/10.1533/9781845691271
18. Barnes, C. J., Childs, T. H. C., Henson, B. and Southee, C. H. Surface finish and touch – a case study in a new human factors tribology. Wear, 2004, 257(7–8), 740–750.
https://doi.org/10.1016/j.wear.2004.03.018
19. Abrar, H., Podgursky, V., Goliandin, D., Viljus, M., Antonov, M., Bogatov, A. and Krasnou, I. Tribological and mechanical properties investigations of post-consumer cotton textiles. Solid State Phenom., 2021, 320, 97–102.
20. Kothari, V. K., Das, A. and Sreedevi, R. Cut resistance of textile fabrics – A theoretical and an experimental approach. Indian J. Fibre Text. Res., 2007, 32, 306–311.
21. Hussain, A., Podgursky, V., Goljandin, D., Antonov, M., Basit, M. A. and Ahmad, T. Mild steel tribology for circular economy of textile industries. Accepted for publication in Tribol. Ind.
22. Hussain, A., Podgursky, V., Goljandin, D. and Antonov, M. TiAlN coatings tribology for textile machinery parts. Proc. Est. Acad. Sci., 2021, 70(2), 163–171.
https://doi.org/10.3176/proc.2021.2.04
