ESTONIAN ACADEMY
PUBLISHERS
eesti teaduste
akadeemia kirjastus
PUBLISHED
SINCE 1984
 
Oil Shale cover
Oil Shale
ISSN 1736-7492 (Electronic)
ISSN 0208-189X (Print)
Impact Factor (2022): 1.9
EFFECT OF BIOLEACHING ON THE YIELD AND COMPOSITION OF MEIHEKOU OIL SHALE (CHINA); pp. 174–184
PDF | doi: 10.3176/oil.2014.2.07

Authors
Xue-Qing Zhang, YU-HONG FEI, YA-SONG LI, BING ZHOU, HE-JUN REN, Lan-Ying Zhang
Abstract

The paper focuses on investigating the impact of mineral compo­nents of Meihekou oil shale on the conversion of organic carbon from the oil shale into shale oil. A number of leaching operations were performed and each product formed in the bioleaching process was analyzed. The analysis showed that the bioleaching technology used is best for oil shale conversion. The yield of shale oil was from 8.3% to 11.2%, and approximately 8.4% of extra shale oil was obtained. During bioleaching a lot of micropores were generated in oil shale, which is favorable to transfer heat from the outside into the inside of the bioleached oil shale sample. Therefore, more shale oil could be obtained through the micropores rapidly, which may avoid shale oil from cracking into shale gas. Finally, bioleaching contributes to the pro­duction of more shale oil.

References

  1. Ballice, L. Effect of demineralization on yield and composition of the volatile products evolved from temperature-programmed pyrolysis of Beypazari (Turkey) oil shale. Fuel Process. Technol., 2005, 86(6), 673–690.
http://dx.doi.org/10.1016/j.fuproc.2004.07.003

  2. Sert, M., Ballice, L., Yüksel, M., Sağlam, M. The effects of acid treatment on the pyrolysis of Göynük oil shale (Turkey) by thermogravimetric analysis. Oil Shale, 2012, 29(1), 51–62.
http://dx.doi.org/10.3176/oil.2012.1.05

  3. Fu, X., Wang, J., Zeng, Y., Tan, F., Feng, X. Concentration and mode of occurrence of trace elements in marine oil shale from the Bilong Co area, northern Tibet, China. Int. J. Coal Geol., 2011, 85(1), 112–122.
http://dx.doi.org/10.1016/j.coal.2010.10.004

  4. Al-Harahsheh, A., Al-Otoom, A. Y., Shawabkeh, R. A. Sulfur distribution in the oil fractions obtained by thermal cracking of Jordanian El-Lajjun oil shale. Energy, 2005, 30(15), 2784–2795.

  5. Luan, J., Li, A., Su, T., Li, X. Translocation and toxicity assessment of heavy metals from circulated fluidized-bed combustion of oil shale in Huadian, China. J. Hazard. Mater., 2009, 166(2), 1109–1114.
http://dx.doi.org/10.1016/j.jhazmat.2008.12.023

  6. Brandt, A. R. Converting oil shale to liquid fuels with the Alberta Taciuk processor: Energy inputs and greenhouse gas emissions. Energ. Fuel., 2009, 23(12), 6253–6258.
http://dx.doi.org/10.1021/ef900678d

  7. Kök, M. V., Guner, G., Bagci, S. Application of EOR techniques for oil shale fields (in-situ combustion approach). Oil Shale, 2008, 25(2), 217–225.
http://dx.doi.org/10.3176/oil.2008.2.04

  8. Plamus, K., Soosaar, S., Ots, A., Neshumayev, D. Firing Estonian oil shale of higher quality in CFB boilers – environmental and economic impact. Oil Shale, 2011, 28(1S), 113–126.
http://dx.doi.org/10.3176/oil.2011.1S.04

  9. Durand, B., Nicaise, G. Procedures for kerogen isolation. In: Kerogen: Insoluble Organic Matter from Sedimentary Rocks (Durand, B., ed.). Paris, Editions Technip., 1980, 35–53.

10. Larsen, J. W., Pan, C. S., Shawver, S. Effect of demineralization on the macromolecular structure of coals. Energ. Fuel., 1989, 3(5), 557–561.
http://dx.doi.org/10.1021/ef00017a004

11. Organic Geochemistry: Methods and Results (Eglinton, G., Murphy, M. T. J., eds.). Springer, Heidelberg, 1969.

12. Al-Harahsheh, A., Al-Harahsheh, M., Al-Otoom, A., Allawzi, M. Effect of demineralization of El-lajjun Jordanian oil shale on oil yield. Fuel Process. Technol., 2009, 90(6), 818–824.
http://dx.doi.org/10.1016/j.fuproc.2009.03.005

13. Gehrke, T., Telegdi, J., Thierry, D., Sand, W. Importance of extracellular poly­meric substances from Thiobacillus ferrooxidans for bioleaching. Appl. Environ. Microbiol., 1998, 64(7), 2743–2747.

14. Zhou, H. B., Zeng, W. M., Yang, Z. F., Xie, Y. J., Qiu, G. Z. Bioleaching of chalcopyrite concentrate by a moderately thermophilic culture in a stirred tank reactor. Bioresource Technol., 2009, 100(2), 515–520.
http://dx.doi.org/10.1016/j.biortech.2008.06.033

15. Marhual, N. P., Pradhan, N., Kar, R. N., Sukla, L. B., Mishra, B. K. Differential bioleaching of copper by mesophilic and moderately thermophilic acidophilic consortium enriched from same copper mine water sample. Bioresource Technol., 2008, 99(17), 8331–8336.
http://dx.doi.org/10.1016/j.biortech.2008.03.003

16. Findley, J., Appleman, M. D., Yen, T. F. Degradation of oil shale by sulfur-oxidizing bacteria. Appl. Environ. Microbiol., 1974, 28(3), 460–464.

17. Meyer, W. C., Yen, T. F. Enhanced dissolution of oil shale by bioleaching with thiobacilli. Appl. Environ. Microbiol., 1976, 32(4), 610–616.

18. Vrvić, M. M., Matić, V., Vučetić, J., Vitorović, D. Demineralization of an oil shale by Bacillus circulans (“siliceous bacteria”). Org. Geochem., 1990, 16(4–6), 1203–1209.
http://dx.doi.org/10.1016/0146-6380(90)90155-S

19. Cvetković, O., Curiale, J. A., Dragutinović, V., Jarvie, D., Vrvić, M. M., Vito­ro­vić, D. Evidence of stability of sedimentary organic matter during bacterial desilicification of an oil shale. J. Serb. Chem. Soc., 2001, 66(2), 95–99.

20. Dragutinović, V., Vrvić, M. M., Cvetković, O., Vucetić, J., Vitorović, D. Bacterial depyritization of oil shale by thiobacillus ferrooxidans: the effect of initial pH value. J. Serb. Chem. Soc., 1997, 62(4), 343–348.

21. Beškoski, V. P., Milić, J., Mandić, B., Takić, M., Vrvić, M. M. Removal of organically bound sulfur from oil shale by iron(III)-ion generated–regenerated from pyrite by the action of Acidithiobacillus ferrooxidans – Research on a model system. Hydrometallurgy, 2008, 94(1–4), 8–13.
http://dx.doi.org/10.1016/j.hydromet.2008.05.015

22. Milić, J. S., Beškoski, V. P., Randjelović, D. V., Stojanović, J., Vrvić, M. M. Visualisation of the interaction between Acidithiobacillus ferrooxidans and oil shale by atomic force microscopy. J. Min. Metall. Sect. B-Metall, 2012, 48(2), 207–217.

Back to Issue