Oil Shale, 2007, Vol. 24, No. 2, pp. 159–174

 

REVIEW OF MECHANICAL PROPERTIES OF OIL SHALES: IMPLICATIONS FOR EXPLOITATION AND BASIN MODELLING

(full text in pdf format)

 

E. ESEME, J. L. URAI, B. M. KROOSS, R. LITTKE

 

 

Mechanical properties of oil shales as a function of temperature and pressure are reviewed. Implications of evolution of these properties for in situ exploitation and basin modelling are explored. Mechanical properties at room temperature are well known. The existing data suggest a positive cor­relation between oil shale grade (organic matter content) and Poisson ratio, whereas tensile and compressive strength as well as modulus of elasticity show negative correlations. These properties are strongly affected by tem­per­ature. An increase in temperature results in loss of strength and decrease in Young’s modulus. Strength follows a logarithmic decrease with increasing temperature, depending on grade. Creep is much enhanced by elevated tem­perature. Extrapolation of laboratory data to nature suggests that tensile fracturing may occur more easily during petroleum generation, and creep is more prominent in oil shales than in other rocks at this depth in the crust. More high-temperature experiments are required to validate these conclusions.

 

 

REFERENCES

1.     Tissot, B. P., Welte, D. H. Petroleum Formation and Occurrence. Springer. New York, 1984.

2.     Dyni, J. R. Geology and resources of some world oil-shale deposits // Oil Shale. 2003. Vol. 20, No. 3. P. 193–252.

3.     Brendow, K. Global oil shale issues and perspectives (Synthesis of the symposium on Oil Shale held in Tallinn (Estonia) on 18 and 19 November 2002 // Oil Shale. 2003. Vol. 20, No. 1. P. 81–92.

4.     Chong, K. P., Smith, J. W. Mechanical characterization of oil shale. In: Chong, K. P., Smith, J. W. (Eds): Mechanics of Oil Shale. Elsevier, 1984. P. 165–228.

5.     Chong, K. P., Uenishi, K., Smith, J. W., Munari, A. C. Non-linear three dimensional mechanical characterization of Colorado oil shale // Int. J. Rock Sci. & Geomech. Abstr. 1980. Vol. 17, No. 6. P. 339–347.
doi:10.1016/0148-9062(80)90517-3

6.     Chang, N.-Y., Bondurant, E. J. Oil shale strength characterization through multiple stage triaxial tests // Proc. 20th US Symposium on Rock Mechanics, Austin, Texas, 1979. P. 393–401.

7.     Clossmann, P., Bradley, W. The effect of temperature on tensile and com­pressive strength and Young's modulus of oil shale // Soc. Petrol. Eng. J. 1977. AIME. SPE-6734, No. 52. P. 301–312.

8.     Miller, R J., Wang, F.-D., DuBow, J. 1978. Mechanical and thermal properties of oil shale at elevated temperatures. In: J. H. Gary (Ed): Proc. 11th Oil Shale Symposium, Colorado School of Mines Press, Golden, 1978. P. 135–146.

9.     Thigpen, L., Heard, H. C. Vertical stress distribution in oil shale aggregate columns during retorting // Soc. Petrol. Eng. J. 1979. Vol. 19, No. 2. P. 97–106.

10.  Agapito, J., Hardy, M. Induced horizontal stress method of pillar design in oil shale // Proc. 15th Oil Shale Symposium, Colorado School of Mines, Golden, 1982. P. 191–197.

11.  Zeuch, D. H. The mechanical behavior of Anvil Points oil shale at elevated temperatures and confining pressures // Canadian Geotechnical Journal. 1983. Vol 20, No. 2. P. 344–352.

12.  Reinsalu, E. Eighty anniversary of oil-shale mining in Estonia // Oil Shale. 1996. Vol. 13, No. 3. P. 161–170.

13.  Fainberg, V., Hetsroni, G. Research and development in oil shale combustion and processing in Israel // Oil Shale. 1996. Vol. 13, No. 2. P. 87–99.

14.  Eseme, E., Littke, R., Krooss, B. M. Factors controlling the thermo-mechanical deformation of oil shales: implications for mudstone compaction and exploitation // Marine and Petroleum Geology. 2006. Vol. 23, No. 7. P. 715–734.
doi:10.1016/j.marpetgeo.2006.02.007

15.  Fertl, J. W. Evaluation of oil shales using geophysical well-logging techniques. In: T. F. Yen, G. V. Chilingar (Eds): Oil Shale, Elsevier, New York, 1976.

16.  Olson, W. A. Stress relaxation in oil shale. In: Proc. 21st Symposium on Rock Mechanics, 1980. P. 517–520.

17.  Smith, J. W., Chong, K. P. Introduction to mechanics of oil shale. In: Chong, K. P., Smith, J. W. (Eds): Mechanics of Oil Shale.Elsevier, 1984. P. 1–41.

18.  Thomas, H. E. Hydraulic fracturing of Wyoming Green River oil shale: field experiments, phase I // US Bureau of Mines Report Investigation 7596, 1972.

19.  Jensen, H. B. Oil shale in situ research and development // Talley Energy systems final report, US Department of Energy DOE/ LC/ 01791-T1, 1979.

20.  Littke, R., Baker, D. R., Leythaeuser, D. Microscopic and sedimentologic evidence for the generation and migration of hydrocarbons in Toarcian source rocks of different maturities // Org. Geochem. 1988. Vol. 13, No. 1–3. P. 549–559.
doi:10.1016/0146-6380(88)90075-7

21.  Smith. J. W. Relationship between rock density and volume of organic matter in oil shales // Laramie Energy Research Center Report of Investigations 76/6, 1976.

22.  Bordenave, M. L., Espitalié, J., Leplat, P., Oudin, J. L., Vandenbroucke, M. Screen­ing techniques for source rock evaluation. In: Bordenave, M. L. (Ed): Applied Petroleum Geochemistry. Éditions Technip, Paris, 1993. P. 217–278.

23.  Costin, L. S. Material properties of Green River oil shale // Report, Sandia National Laboratories, SAND81-1457, 1981.

24.  Chen, W. F. The continuum theory of rock mechanics. In: Chong, K. P., Smith, J. W. (Eds): Mechanics of Oil Shale. Elsevier, 1984. P. 71–126.

25.  Chong, K. P., Tumer, J. P., Dana, G. F. Strain rate effects on the mechanical properties of Utah oil shale. In: Mechanics of Structured Media, Part A. Elsevier, Amsterdam, 1981. P. 431–445.

26.  Schmidt, R. A. Fracture mechanics of oil shale – unconfined fracture toughness, stress corrosion cracking and tension test results. In: Proc. 18th US Symp. on Rock Mech., Keystone, Colorado, 1977. P. 2A2-1 to ZA2-6.

27.  Young, C., Trent, B. C., Patti, N. C. Stratigraphic variations in fracture properties. In: Chong, K. P., Smith, J. W. (Eds): Mechanics of oil shale. Elsevier, 1984. P. 291–335.

28.  Chu, M.-S., Chang, N.-Y. Uniaxial creep of oil shale under elevated temperatures. In: Summers D. A. (Ed): Rock Mechanics, a state-of-the-art. Proc. 21st VS Symposium on Rock Mechanics, University of Missouri at Rolla, 1980. P. 207–216.

29.  Means, D. W. Kinematics, stress, deformation and material behaviour // J. Struct. Geol. 1990. Vol. 12, No. 8. P. 953–971.
doi:10.1016/0191-8141(90)90092-D

30.  Smith, J. W., Robb, W. A., Young, N. B. High temperature reactions of oil shale minerals and their benefit to oil shale processing in place. In: J. H. Gary (Ed): Eleventh Oil Shale Symposium Proceedings, Colorado School of Mines Press, Golden, 1978. P. 100–112.

31.  Patterson, J. H. A review of the effects of minerals in processing of Australian oil shales // Fuel. 1994. Vol. 73, No. 3. P. 321–327.