ESTONIAN ACADEMY
PUBLISHERS
eesti teaduste
akadeemia kirjastus
PUBLISHED
SINCE 1952
 
Proceeding cover
proceedings
of the estonian academy of sciences
ISSN 1736-7530 (Electronic)
ISSN 1736-6046 (Print)
Impact Factor (2022): 0.9
Analysis of thermal management in prismatic and cylindrical lithium-ion batteries with mass flow rate and geometry of cooling plate channel variation for cooling system based on computational fluid dynamics; pp. 267–274
PDF | 10.3176/proc.2022.3.01

Authors
Thalita Maysha Herninda, Laurien Merinda, Ghina Kifayah Putri, Enda Grimonia, Nur Laila Hamidah, Gunawan Nugroho, Erkata Yandri, Ivar Zekker, Idrees Khan, Luqman Ali Shah, Roy Hendroko Setyobudi
Abstract

There is a global need for lithium-ion battery (LIB) with high specific power density and energy density; however, LIB is very sensitive to temperature. To guarantee the safety and performance of LIB, mini channel liquid-cooled plate was applied as a part of battery thermal management system. In this research, the effect of water mass flow rate and the geometry of liquid-cooled plate channel were investigated. The variation of geometry is affected by the width of the channel on the prismatic battery and the number of channels on the cylindrical battery. The results show that the battery temperature decreases with increasing the inlet mass flow rate, the number and width of cooling channels. Controlling the inlet mass flow rate and cooling channels is not necessary in case certain critical values are avoided. Thus, applying 10–3 kg/s–1 of mass flow rate in 8 mm channel width effectively decreased the prismatic battery temperature from 45 °C to 30 °C. Moreover, the use of wider channel decreases the pressure drop inside the channel. It can be concluded that by using eight cooling channels with 0.001 kg/s–1 inlet mass flow rate, the maximum temperature can be controlled up to 12.06 °C for a cylindrical battery. This study helps increasing energy efficiency, which further promotes the circular economy program.

References

1. Rao, Z. and Wang, S. A review of power battery thermal energy management. Renew. Sust. Energ. Rev., 2011, 15(9), 4554–4571. 
https://doi.org/10.1016/j.rser.2011.07.096

2. Qian, Z., Li, Y. and Rao, Z. Thermal performance of lithium-ion battery thermal management system by using mini-chan­- nel cooling. Energy Convers. Manag., 2016, 126, 622–631. 
https://doi.org/10.1016/j.enconman.2016.08.063

3. Mahamud, R. and Park, C. Reciprocating air flow for Li-ion battery thermal management to improve temperature uni­formity. J. Power Sources, 2011, 196(13), 5685–5696. 
https://doi.org/10.1016/j.jpowsour.2011.02.076

4. Azizi, Y. and Sadrameli, S. M. Thermal management of a LiFePO 4 battery pack at high temperature environment using a composite of phase change materials and aluminum wire mesh plates. Energy Convers. Manag., 2016, 128, 294–302. 
https://doi.org/10.1016/j.enconman.2016.09.081

5. Hamidah, N. L., Nugroho, G., Wang, F. M. Electrochemical analysis of electrolyte additive effect on ionic diffusion for high-performance lithium ion battery. Ionics, 2016, 22, 33–41.
https://doi.org/10.1007/s11581-015-1505-0

6. Hamidah, N. L., Nugroho, G., Wang, F. M. The understanding of solid electrolyte interface (SEI) formation and mechanism as the effect of flouro-o-phenylenedimaleimaide (F-MI) additive on lithium-ion battery. Surf. Interface Anal., 2019, 51, 345–352.
https://doi.org/10.1002/sia.6586

7. Greco, A., Cao, D., Jiang, X. and Yang, H. A theoretical and computational study of lithium-ion battery thermal manage­ment for electric vehicles using heat pipes. J. Power Sources, 2014, 257, 344–355. 
https://doi.org/10.1016/j.jpowsour.2014.02.004

8. Xu, J., Lan, C., Qiao, Y. and Ma, Y. Prevent thermal runaway of lithium-ion batteries with minichannel cooling. Appl. Therm. Eng., 2017, 110, 883–890.
https://doi.org/10.1016/j.applthermaleng.2016.08.151

9. Lan, C., Xu, J., Qiao, Y. and Ma, Y. Thermal management for high power lithium-ion battery by minichannel alumi­num tubes. Appl. Therm. Eng., 2016, 101, 284–292. 
https://doi.org/10.1016/j.applthermaleng.2016.02.070

10. Fan, L., Khodadadi, J. and Pesaran, A. A parametric study on thermal management of an air-cooled lithium-ion battery module for plug-in hybrid electric vehicles. J. Power Sources, 2013, 238, 301–312. 
https://doi.org/10.1016/j.jpowsour.2013.03.050

11. Chen, D., Jiang, J., Kim, G., Yang, C. and Pesaran, A. Comparison of different cooling methods for lithium-ion battery cells. Appl. Therm. Eng., 2016, 94, 846–854.
https://doi.org/10.1016/j.applthermaleng.2015.10.015

12. Zhao, J., Rao, Z. and Li, Y. Thermal performance of mini-channel liquid cooled cylinder based battery thermal man­- age­ment for cylindrical lithium-ion power battery. Energy Convers. Manag., 2015, 103, 157–165. 
https://doi.org/10.1016/j.enconman.2015.06.056

13. Huo, Y., Rao, Z., Liu, X. and Zhao, J. Investigation of power battery thermal management by using mini-channel cold plate. Energy Convers. Manag., 2015, 89, 387–395. 
https://doi.org/10.1016/j.enconman.2014.10.015

14. Makijenko, J., Burlakovs, J., Brizga, J. and Klavins, M. Energy efficiency and behavioral patterns in Latvia. Manag. Environ. Qual., 2016, 27(6), 695–707.
https://doi.org/10.1108/MEQ-05-2015-0103

Back to Issue