ESTONIAN ACADEMY
PUBLISHERS
eesti teaduste
akadeemia kirjastus
PUBLISHED
SINCE 1952
 
Proceeding cover
proceedings
of the estonian academy of sciences
ISSN 1736-7530 (Electronic)
ISSN 1736-6046 (Print)
Impact Factor (2022): 0.9
Determination of residual stresses and material properties by an energy-based method using artificial neural networks; pp. 296–305
PDF | doi: 10.3176/proc.2012.4.04

Authors
Hongping Jin, Wenyu Yang, Lin Yan
Abstract

With the help of an energy-based method and dimensional analysis, an artificial neural network model is constructed to extract the residual stress and material properties using spherical indentation. The relationships between the work of residual stress, the residual stress, and material properties are numerically calibrated through training and validation of the artificial neural network (ANN) model. They enable the direct mapping of the characteristics of the indentation parameters to the equi-biaxial uniform residual stress and the elastic–plastic material properties. The proposed ANN can quickly and effectively predict the residual stress and material properties based on the load–depth curve of spherical indentation.

References

 

  1. Lu, J. Handbook of Measurement of Residual Stresses. The Fairmont Press, Lilburn, 1996.

  2. Pethica, J. B., Hutchings, R., and Oliver, W. C. Hardness measurement at penetration depths as small as 20 nm. Philos. Mag. A, 1983, 48, 593–606.
http://dx.doi.org/10.1080/01418618308234914

  3. Oliver, W. C. and Pharr, G. M. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J. Mater. Res., 1992, 7, 1564–1583.
http://dx.doi.org/10.1557/JMR.1992.1564

  4. Tunvisut, K., Busso, E. P., O’dowd, N. P., and Brant­ner, H. P. Determination of the mechanical properties of metallic thin films and substrates from indentation tests. Philos. Mag. A, 2002, 82, 2013–2029.
http://dx.doi.org/10.1080/01418610208235713

  5. Luo, J., Lin, J., and Dean, T. A. A study on the determination of mechanical properties of a power law material by its indentation force-depth curve. Philos. Mag., 2006, 86, 2881–2905.
http://dx.doi.org/10.1080/14786430600640528

  6. Fernandes, J. V., Antunes, J. M., Sakharova, N. A., Oliveira, M. C., and Menezes, L. F. Young’s modulus of thin films using depth-sensing indentation. Phil. Mag. Lett., 2010, 90, 9–22.
http://dx.doi.org/10.1080/09500830903334312

  7. Khan, M. K., Hainsworth, S. V. Fitzpatrick, M. E., and Edwards, L. A combined experimental and finite element approach for determining mechanical properties of aluminium alloys by nanoindentation. Comp. Mater. Sci., 2010, 49, 751–760.
http://dx.doi.org/10.1016/j.commatsci.2010.06.018

  8. Suresh, S. and Giannakopoulos, A. E. A new method for estimating residual stresses by instrumented sharp indentation. Acta Mater., 1998, 46, 5755–5767.
http://dx.doi.org/10.1016/S1359-6454(98)00226-2

  9. LaFontaine, W. R., Paszkiet, C. A., Korhonen, M. A., and Li, C. Y. Residual stress measurements of thin aluminum metallizations by continuous indentation and x-ray stress. J. Mater. Res., 1991, 6, 2084–2090.
http://dx.doi.org/10.1557/JMR.1991.2084

10. Lee, Y. H. and Kwon, D. Residual stress in DLC/Si and Cu/Si systems: application of a stress-relaxation model to the nanoindentation technique. J. Mater. Res., 2002, 17, 901–906.
http://dx.doi.org/10.1557/JMR.2002.0131

11. Chen, X., Yan, J., and Karlsson, A. M. On the determina­tion of residual stress and mechanical properties by indentation. Mater. Sci. Eng. A, 2006, 416, 139–149.
http://dx.doi.org/10.1016/j.msea.2005.10.034

12. Zhao, M. H., Chen, X., Yan, J., and Karlsson, A. M. Determination of uniaxial residual stress and mechanical properties by instrumented indentation. Acta Mater., 2006, 54, 2823–2832.
http://dx.doi.org/10.1016/j.actamat.2006.02.026

13. Yan, J., Chen, X., and Karlsson, A. M. Determining equi-biaxial residual stress and mechanical properties from the force-displacement curves of conical micro­indenta­tion. J. Eng. Mater. Technol., 2007, 129, 200–206.
http://dx.doi.org/10.1115/1.2400280

14. Xu, Z. H. and Li, X. Estimation of residual stresses from elastic recovery of nanoindentation. Philos. Mag., 2006, 86, 2835–2846.
http://dx.doi.org/10.1080/14786430600627277

15. Wang, Q., Ozaki, K., Ishikawa, H., Nakano, S., and Ogiso, H. Indentation method to measure the residual stress induced by ion implantation. Nucl. Instrum. Methods B, 2006, 242, 88–92.
http://dx.doi.org/10.1016/j.nimb.2005.08.008

16. Dean, J., Aldrich-Smith, G., and Clyne, T. W. Use of nanoindentation to measure residual stresses in surface layers. Acta Mater., 2011, 59, 2749–2761.
http://dx.doi.org/10.1016/j.actamat.2011.01.014

17. Swadener, J. G., Taljat, B., and Pharr, G. M. Measurement of residual stress by load and depth sensing indenta­tion with spherical indenters. J. Mater. Res., 2001, 16, 2091–2102.
http://dx.doi.org/10.1557/JMR.2001.0286

18. Skinner, A. J. and Broughton, J. Q. Neural networks in computational materials science: training algorithms. Model. Simul. Mater. Sc., 1995, 3, 371–390.
http://dx.doi.org/10.1088/0965-0393/3/3/006

19. Huber, N. and Tsakmakis, C. Determination of constitutive properties from spherical indentation data using neural networks. Part I: The case of pure kinematic hardening in plasticity laws. J. Mech. Phys. Solid, 1999, 47, 1569–1588.
http://dx.doi.org/10.1016/S0022-5096(98)00109-4

20. Huber, N. and Tsakmakis, C. Determination of constitutive properties from spherical indentation data using neural networks. Part II: Plasticity with nonlinear isotropic and kinematic hardening. J. Mech. Phys. Solid, 1999, 47, 1589–1607.
http://dx.doi.org/10.1016/S0022-5096(98)00109-4

21. Tho, K. K., Swaddiwudhipong, S., Liu, Z. S., and Hua, J. Artificial neural network model for material charac­terization by indentation. Model. Simul. Mater. Sc., 2004, 12, 1055–1062.
http://dx.doi.org/10.1088/0965-0393/12/5/019

22. Swaddiwudhipong, S., Tho, K. K., Liu, Z. S., Hua, J., and Ooi, N. S. B. Material characterization via least squares support vector machines. Model. Simul. Mater. Sc., 2005, 13, 993–1004.
http://dx.doi.org/10.1088/0965-0393/13/6/013

23. Haj-Ali, R., Hoan-Kee, K., Sau, W. K., Saxena, A., and Rao, T. Nonlinear constitutive models from nano­indenta­tion tests using artificial neural networks. Int. J. Plast., 2008, 24, 371–396.
http://dx.doi.org/10.1016/j.ijplas.2007.02.001

24. Bolshakov, A., Oliver, W. C., and Pharr, G. M. Influences of stress on the measurement of mechanical properties using nanoindentation: Part II. Finite element simula­tions. J. Mater. Res., 1996, 11, 760–768.
http://dx.doi.org/10.1557/JMR.1996.0092

25. Tsui, T. Y. and Pharr, G. M. Substrate effects on nano­indentation mechanical property measurements of soft films on hard substrates. J. Mater. Res., 1999, 14, 292–301.
http://dx.doi.org/10.1557/JMR.1999.0042

26. Cheng, Y. T. and Cheng, C. M. Scaling relationships in conical indentation of elastic perfectly plastic solids. Int. J. Solids Struct., 1999, 36, 1231–1243.
http://dx.doi.org/10.1016/S0020-7683(97)00349-1

27. Abaqus Analysis Users Manual: Version 6.8. Simulia, 2008.

28. Tabor, D. The Hardness of Metals. Clarendon Press, Oxford, 1951.

29. Matlab 2010. Matlab 2010a. The MathWorks Incorporate.

 

Back to Issue