ESTONIAN ACADEMY
PUBLISHERS
eesti teaduste
akadeemia kirjastus
PUBLISHED
SINCE 1952
 
Proceeding cover
proceedings
of the estonian academy of sciences
ISSN 1736-7530 (Electronic)
ISSN 1736-6046 (Print)
Impact Factor (2022): 0.9
Total and size fractionated concentrations of metals in combustion ash from forest residues and peat; pp. 247–254
PDF | doi: doi: 10.3176/proc.2009.4.06

Authors
Risto Pöykiö, Hannu Nurmesniemi, Riitta L. Keiski
Abstract

Environmental characteristics of the total and size fractionated concentrations of metals in bottom ash and fly ash from a large (246 MW) fluidized-bed boiler incinerating forest residues and peat at a pulp and paper mill complex in Finland were studied. Although the enrichment factors for total metal concentrations in the fly ash varied between 1.3 (potassium and sodium) and 34.5 (sulphur), all metal concentrations in both the bottom ash and fly ash were significantly lower than the current Finnish limit values for maximum allowable metal concentrations for forest fertilizers. Therefore, both the studied ashes are residues with a potential to be utilized as forest fertilizers as such. Only the arsenic concentration of 33.0 mg/kg (d.w.) in the fly ash fraction between 1.0–2.0 mm exceeded the Finnish limit value of 30 mg/kg (d.w.) set for arsenic in the forestry fertilizers. This means that the fly ash fraction of 1.0–2.0 mm is not suitable for a forestry fertilizer alone.

References

  1. Röser, D., Pasanen, K., and Asikainen, A. Decision-support program “EnerTree” for analyzing forest residues recovery options. Biomass Bioenerg., 2006, 13, 326–333.
doi:10.1016/j.biombioe.2005.07.010

  2. Pingoud, K. and Lehtilä, A. Role of forest sector and bioenergy in limiting the carbon emissions of Finland. Biomass Bioenerg., 1997, 14, 33–56.

  3. Mroueh, U. M. and Wahlström, M. By-products and recycl­ing materials in earth construction in Finland – an assessment of applicability. Resour. Conserv. Recy., 2002, 35, 117–129.
doi:10.1016/S0921-3449(01)00126-4

  4. Dahl, O., Nurmesniemi, H., Pöykiö, R., and Watkings, G. Comparison of the characteristics of bottom ash and fly ash from a medium-size (32 MW) municipal district heating plant incinerating forest residues and peat in a fluidized bed boiler. Fuel Process. Technol., 2009, 90(7–8), 871–878.
doi:10.1016/j.fuproc.2009.04.013

  5. Rönkkömäki, H., Pöykiö, R., Nurmesniemi, H., Popov, K., Merisalu, E., Tuomi, T., and Välimäki, I. Particle size distribution and dissolution properties of metals in cyclone fly ash. Int. J. Environ. Sci. Technol., 2008, 5, 485–494.

  6. Pöykiö, R., Rönkkömäki, H., Nurmesniemi, H., Tenno, T., and Paama, L. Extractability of heavy metals in cyclone ash. Proc. Estonian Acad. Sci., 2008, 57, 100–106.
doi:10.3176/proc.2008.2.04

  7. Gerlach, R. W., Dobb, D. E., Raab, G. A., and Necerino, J. M. Gy sampling theory in environmental studies. 1. Assessing soil splitting protocols. J. Chemometr., 2002, 16, 321–328.
doi:10.1002/cem.705

  8. USEPA Method 3051A. Microwave assisted acid diges­tion of sediments, sludges, soils and oils. Washington DC, United States, 1992. Available at: www.epa.gov (accessed in November 2007).

  9. Van Herck, P. and Vandecasteele, C. Evaluation of the use of a sequential extraction procedure for the charac­terization and treatment of metal containing solid waste. Waste Manage., 2001, 21, 685–694.
doi:10.1016/S0956-053X(01)00011-3

10. Page, A. L., Elseewi, A., and Straughan, L. Physical and chemical properties of fly ash from coal-fired power plants with reference to environmental impacts. Residue Rev., 1979, 71, 83–120.

11. Ecke, H., Menad, N., and Lagerkvist, A. Treatment-oriented characterization of dry scrubber residue from municipal solid waste incineration. J. Mater. Cycles Waste Manage., 2002, 4, 117–126.

12. Steenari, B. M. and Lindqvist, O. Stabilisation of biofuel ashes for recycling to forest soil. Biomass Bioenerg., 1997, 13, 39–50.
doi:10.1016/S0961-9534(97)00024-X

13. Álvarez-Ayuso, E., Querol, X., and Tomás, A. Environ­mental impact of a coal combustion-desulphurisation plant: abatement capacity of desulphurisation process and environmental characterisation of combustion by-products. Chemosphere, 2006, 65, 2009–2017.
doi:10.1016/j.chemosphere.2006.06.070

14. Narodoslawsky, M. and Obernberger, I. From waste to raw material – the route from biomass to wood ash for cadmium and other heavy metals. J. Hazard. Mater., 1996, 50, 157–168.
doi:10.1016/0304-3894(96)01785-2

15. Demeyer, A., Voundi Nkana, J. C., and Verloo, M. Char­acteristics of wood ash and influence on soil properties and nutrient uptake: an overview. Biores. Technol., 2001, 77, 287–295.
doi:10.1016/S0960-8524(00)00043-2

16. Obernberger, I. Decentralized biomass combustion: state of the art and fuel development. Biomass Bioenerg., 1998, 14, 33–56.
doi:10.1016/S0961-9534(97)00034-2

17. Aronsson, K. and Ekelund, N. Biological effects of wood ash application to forest and aquatic ecosystems. J. Environ. Qual., 2004, 33, 1595–1605.

18. Chimenos, J., Segarra, M., Fernández, F., and Espiell, F. Characterization of the bottom ash in municipal solid waste incineration. J. Hazard. Mater., 1999, 64, 211–222.
doi:10.1016/S0304-3894(98)00246-5

19. Chang, F. Y. and Wey, M. Y. Comparison of the char­acteristics of bottom ash and fly ashes from various incineration processes. J. Hazard. Mater., 2006, 138, 594–603.
doi:10.1016/j.jhazmat.2006.05.099

20. Osán, J., Alföldy, B., Török, S., and Van Grieken, R. Char­acterisation of wood combustion particles using electron probe microanalysis. Atmos. Environ., 2002, 36, 2207–2214.
doi:10.1016/S1352-2310(02)00153-X

21. Liao, C., Wu, C., and Yan, Y. The characteristics of inorganic elements in ashes from a 1 MW CFB biomass gasification power generation plant. Fuel Process. Technol., 2007, 88, 149–156.
doi:10.1016/j.fuproc.2005.06.008

22. Chen, Y., Shah, N., Huggins, F., and Huffman, G. Trans­mission electron microscopy investigations of ultrafine coal fly ash particles. Environ. Sci. Technol., 2005, 39, 1144–1151.
doi:10.1021/es049871p

23. Cprek, N., Shah, N., Huggins, F., and Huffman, G. Computer controlled scanning electron microscopy (CCSEM) investigation of quartz in coal fly ash. Fuel Process. Technol., 2007, 88, 1017–1020.
doi:10.1016/j.fuproc.2007.06.007

24. Sutherland, R. A. Lead in grain size fractions of road-deposited sediment. Environ. Pollut., 2003, 21, 229–237.
doi:10.1016/S0269-7491(02)00219-1

25. Wang, X. S., Qin, Y., and Chen, Y. K. Heavy metals in urban roadside soils, part I. Effect of particle size fractionations on heavy metals partitioning. Environ. Geol., 2006, 50, 1061–1066.
doi:10.1007/s00254-006-0278-1

26. Sarkar, A., Rano, R., Mishra, K. K., and Sinha, I. N. Particle size distribution profile of some Indian fly ash – a comparative study to assess their possible uses. Fuel Process. Technol., 2005, 86, 1221–1238.
doi:10.1016/j.fuproc.2004.12.002

27. Orava, H., Nordman, T., and Kuopanportti, H. Increase the utilisation of fly ash with electrostatic precipitation. Miner. Eng., 2006, 19, 1596–1602.
doi:10.1016/j.mineng.2006.07.002

Back to Issue