ESTONIAN ACADEMY
PUBLISHERS
eesti teaduste
akadeemia kirjastus
PUBLISHED
SINCE 1984
 
Oil Shale cover
Oil Shale
ISSN 1736-7492 (Electronic)
ISSN 0208-189X (Print)
Impact Factor (2022): 1.9
CHANGES IN OIL SHALE CHARACTERISTICS DURING SIMULATED IN-SITU PYROLYSIS IN SUPERHEATED STEAM; pp. 230–241
PDF | https://doi.org/10.3176/oil.2018.3.03

Authors
LEI WANG, DONG YANG, JING ZHAO, YANGSHENG ZHAO, ZHIQIN KANG
Abstract

Internal pores and fractures inside oil shale undergo complex changes during pyrolysis in superheated steam. After a simulated in-situ pyro­lysis in superheated steam, the pore characteristics of 30 oil shale samples from different zones between the injection and production wells were investigated using mercury intrusion porosimetry (MIP). The results showed that the porosity of oil shale exceeded 27.65% in each position of horizontal fractures. In different types of pores, the proportions of mesopore (0.1 µm < d ≤ 1 µm) and micropore (d ≤ 0.015 µm) were the largest and the smallest, respectively. Moreover, mesopores outnumbered micropores. The pore structure of pyrolyzed oil shale after convection heating was complex. After the pyrolysis in superheated steam, the proportion of the oil shale ore body with a porosity ranging from 23 to 31% was 74.95% of total. This finding proved that oil shale was transformed from dense rock to a porous medium under the effect of superheated steam.

References

1.       Liu, R., Liu, Z. J. Oil shale resource situation and multi-purpose development potential in China and abroad. Journal of Jilin University (Earth Science Edi­tion), 2006, 36(6), 892–898 (in Chinese).

2.       Zhao, J., Yang, D., Kang, Z. Q., Feng, Z. C. A Micro-Ct study of changes in the internal structure of Daqing and Yan’an oil shales at high temperatures. Oil Shale, 2012, 29(4), 357–367.
https://doi.org/10.3176/oil.2012.4.06

3.       Liu, Z. J., Dong, Q. S., Ye, S. Q., Zhu, J. W., Guo, W., Li, D. C., Liu, R., Zhang, H. L., Du, J. F. The situation of oil shale resources in China. Journal of Jilin University (Earth Science Edition), 2006, 36(6), 869–876 (in Chinese).

4.       Hao, Y., Gao, X. Q., Xiong, F. S., Zhang, J. L., Li, Y. J. Temperature distribu­tion simulation and optimization design of electric heater for in-situ oil shale heating. Oil Shale, 2014, 31(2), 105–120.
https://doi.org/10.3176/oil.2014.2.02

5.       Han, H., Zhong, N. N., Huang, C. X., Liu, Y., Luo, Q. Y., Dai, N., Huang, X. Y. Numerical simulation of in situ conversion of continental oil shale in Northeast China. Oil Shale, 2016, 33(1), 45–57.
https://doi.org/10.3176/oil.2016.1.04

6.       Yu, X. D., Luo, Z. F., Yang, X. L., Jiang, H. S., Zhou, E. H., Zhang, B., Dong, L. Oil shale separation using a novel combined dry beneficiation process. Fuel, 2016, 180, 148–156.
https://doi.org/10.1016/j.fuel.2016.04.036

7.       Burnham, A. K., Mcconaghy, J. R. Comparison of the acceptability of various oil shale processes. 26th Oil Shale Symposium, Colorado School of Mines, 16–19 October 2006, Colorado, USA.

8.       Bai, F. T. Theoretical and experimental research of oil shale pyrolysis triggered by topochemical heat. PhD Thesis, Changchun: Jilin University, 2015 (in Chinese).

9.       Dyni, J. R. Geology and resources of some world oil-shale deposits. Oil Shale, 2003, 20(3), 193–252.

10.   Kang, Z. Q., Zhao, Y. S., Yang, D. Physical principle and numerical analysis of oil shale development using in-situ conversion process technology. Acta Petrolei Sinica, 2008, 29(4), 592–595 (in Chinese).

11.   Kang, Z. Q., Yang, D., Zhao, Y. S., Hu, Y. Q. Thermal cracking and corres­ponding permeability of Fushun oil shale. Oil Shale, 2011, 28(2), 273–283.
https://doi.org/10.3176/oil.2011.2.02

12.   Yang, L. S., Yang, D., Zhao, J., Liu, Z. H., Kang, Z. Q. Changes of oil shale pore structure and permeability at different temperatures. Oil Shale, 2016, 33(2), 101–110.
https://doi.org/10.3176/oil.2016.2.01

13.   Cao, D. G., Su, D. G., Yang, Z. Y., Song, G. S. Study of the microstructure of metakaolinite with IR, TG, SEM, XRD methods. Acta Mineralogica Sinica, 2004, 24(4), 366–372 (in Chinese).

14.   Bhargava, S., Awaja, F., Subasinghe, N. D. Characterisation of some Australian oil shale using thermal, X-ray and IR techniques. Fuel, 2005, 84(6), 707–715.
https://doi.org/10.1016/j.fuel.2004.11.013

15.   Liu, W., Muhammad, N., Chen, J., Spiers, C. J., Peach, C. J., Deyi, J., Li, Y. P. Investigation on the permeability characteristics of bedded salt rocks and the tightness of natural gas caverns in such formations. Journal of Natural Gas Science & Engineering, 2016, 35, 468–482.
https://doi.org/10.1016/j.jngse.2016.07.072

16.   Li, Q. Simulation of temperature field and experiment of in-situ oil shale pyrolysis. PhD Thesis, Changchun: Jilin University, 2012 (in Chinese).

17.   Li, Z. Q., Xian, X. F., Long, Q. M. Experiment study of coal permeability under different temperatures and stresses. Journal of China University of Mining & Technology, 2009, 38(4), 523–527 (in Chinese).

18.   Yang, D., Kang, Z. Q., Zhao, J., Zhao, Y. S. CT Experiment research of oil shale under high temperature. Journal of Taiyuan University of Technology, 2011, 42(3), 255–257 (in Chinese).

19.   Bai, F. T., Sun, Y. H., Liu, Y. M., Guo, M. Y. Evaluation of the porous structure of Huadian oil shale during pyrolysis using multiple approaches. Fuel, 2017, 187, 1–8.
https://doi.org/10.1016/j.fuel.2016.09.012

Back to Issue