, Omar S. Al-Ayed , Mohammed MatoqTwo different shale oils were produced by the pyrolysis of oil shale from the Attarat Um-Ghudran and El-Lajjun areas in Jordan. The ionic liquids [BMIM]BF4 and [BMIM]PF6 were used to extract sulfur compounds from the shale oils. The two shale oils generated from Attarat and El-Lajjun were found to contain 12.1 and 11.2 wt.% sulfur, respectively. The extraction of sulfur compounds from shale oil was studied at 20, 40, and 60 °C, with 40 °C being the optimum. The volume ratios of ionic liquid to shale oil (IL/SO) investigated were 1.0:1.0, 1.0:3.0, 1.0:5.0, 1.0:8.0, and 1.0:10.0. For Attarat shale oil, the 1.0:5.0 ratio resulted in removal efficiencies of 58.7% (7.1/12.1) and 54.6% (6.6/12.1) for [BMIM]PF6 and [BMIM]BF4, respectively, which were lower than those calculated for the 1.0:1.0 (IL/SO) ratio, i.e., 62.8% (7.6/12.1) and 57.9% (7.0/12.1), respectively. However, the 1.0:5.0 ratio is more economical and was therefore selected. Based on the calculated extraction efficiencies, [BMIM]PF6 is a slightly more effective extracting agent.
1. Statistica Research Department. Demand for crude oil worldwide from 2005 to 2025, with a forecast for 2026.
https://www.statista.com/statistics/271823/global-crude-oil-demand/ (accessed 2026-04-08).
2. Liu, X., Yi, R., Zhao, D., Luo, W., Huang, L., Su, J. et al. Research progress on the pyrolysis characteristics of oil shale in laboratory experiments. Processes, 2025, 13(9), 2787.
https://doi.org/10.3390/pr13092787
3. Al-Harahsheh, A., Al-Otoom, A. Y., Shawabkeh, R. A. Sulfur distribution in the oil fractions obtained by thermal cracking of Jordanian El-Lajjun oil shale. Energy, 2005, 30(15), 2784–2795.
https://doi.org/10.1016/j.energy.2005.01.013
4. Al-Ayed, O. S., Hajarat, R. A., Khalil, K. M. A., Alshadfan, D. M. M., Daoud, K. H. M, Abu-Jamil, W. J. et al. Ionic liquids, [EMIM]Cl and [BMIM]SCN for sulfur removal from shale oils. Oil Shale, 2026, 43(1), 104–116.
https://doi.org/10.3176/oil.2026.1.05
5. Al-Daradka, M. M. A., Al-Ayed, O. S., Abu-Nameh, E. S. M. Removal of sulfur-containing compounds from shale oil using ionic liquids. Jordanian Journal of Engineering and Chemical Industries, 2025, 8(2), 129–135.
https://doi.org/10.48103/jjeci8142025
6. Al-Ayed, O. S. Distillation curves under the influence of temperature and particle size of Ellajjun oil shale. Proceedings of the International Green Energy Conference, Waterloo, Ontario, Canada, 12–16 June 2005, Vol. 37, Issue 40, Paper No. IGEC-1-ID06.
7. Al-Ayed, O. S., Al-Harahsheh, A., Khaleel, A. M., Al-Harahsheh, M. Oil shale pyrolysis in fixed-bed retort with different heating rates. Oil Shale, 2009, 26(2), 139–147.
https://doi.org/10.3176/OIL.2009.2.06
8. Mozaffari, S., Baird, Z. S., Järvik, O. Sulfur in kukersite shale oil: its distribution in shale oil fractions and the effect of gaseous environment. Journal of Thermal Analysis and Calorimetry, 2022, 147, 11601–11610.
https://doi.org/10.1007/s10973-022-11359-8
9. Dijkmans, T., Djokic, M. R., Van Geem, K. M., Marin, G. B. Comprehensive compositional analysis of sulfur and nitrogen containing compounds in shale oil using GC×GC – FID/SCD/NCD/TOF-MS. Fuel, 2015, 140, 398–406.
https://doi.org/10.1016/j.fuel.2014.09.055
10. Wang, S., Jiang, X., Han, X., Tong, J. Effect of residence time on products yield and characteristics of shale oil and gases produced by low-temperature retorting of Dachengzi oil shale. Oil Shale, 2013, 30(4), 501–516.
https://doi.org/10.3176/oil.2013.4.04
11. Pan, L., Dai, F., Pei, S., Huang, J., Liu, S. Influence of particle size and temperature on the yield and composition of products from the pyrolysis of Jimsar (China) oil shale. Journal of Analytical and Applied Pyrolysis, 2021, 157, 105211.
https://doi.org/10.1016/j.jaap.2021.105211
12. Al-Ayed, O. S., Suliman, M. R., Rahman, N. A. Kinetic modeling of liquid generation from oil shale in fixed bed retort. Applied Energy, 2010, 87(7), 2273–2277.
https://doi.org/10.1016/j.apenergy.2010.02.006
13. Bello, S. S., Wang, C., Zhang, M., Han, Z., Shi, L., Wang, K. et al. Recycling the CoMo/Al2O3 catalyst for effectively hydro-upgrading shaleoil with high sulfur content and viscosity. RSC Advances, 2020, 10(61), 37287–37298.
https://doi.org/10.1039/d0ra07419e
14. Yan, F., Song, Y. Evaluation of Fushun shale oil and study on processing project. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 2008, 30(13), 1242–1247.
https://doi.org/10.1080/15567030601082837
15. dos Passos, A. S., Dessuy, M. B., Nakadi, F. V., de Andrade, J. B., Vale, M. G. R. Investigation of different chemical modifiers based on the Pd/Mg mixture for the determination of sulfur in shale oil by high-resolution continuum source graphite furnace molecular absorption spectrometry. Talanta, 2019, 204, 206–212.
https://doi.org/10.1016/j.talanta.2019.05.114
16. Akolkar, H. N., Shaikh, M. H., Haghi, A. K. Introduction to ionic liquids chemistry. In Ionic Liquids: Greener Solvents for Sustainable Chemistry. Synthesis Lectures on Sustainable Development. Springer, Cham, 2026.
https://doi.org/10.1007/978-3-032-02746-7_1
17. Zhang, S., Zhang, Z. C. Novel properties of ionic liquids in selective sulfur removal from fuels at room temperature. Green Chemistry, 2002, 4(4), 376–379.
https://doi.org/10.1039/B205170M
18. Zhang, L., Peng, P., Pan, Q., Wan, F., Zhang, H. Extraction of dibenzyl disulfide from transformer oils by acidic ionic liquid. Molecules, 2024, 29(10), 2395.
https://doi.org/10.3390/molecules29102395
19. Valenzuela, C., Donoso, C., Guzmán-Beckmann, L. Extraction of sulfur from commercial gasoline using 1-butyl-3-methylimidazolium tetrafluoroborate [BMIM] [BF4] as the extraction solvent. (2020). Key Engineering Materials, 2020, 834, 42–48.
https://doi.org/10.4028/www.scientific.net/KEM.834.42
20. Dharaskar, S. A., Wasewar, K. L., Varma, M. N., Shende, D. Z., Yoo, C. Synthesis, characterization and application of 1-butyl-3-methylimidazolium tetrafluoroborate for extractive desulfurization of liquid fuel. Arabian Journal of Chemistry, 2013, 9(4), 578–587.
http://dx.doi.org/10.1016/j.arabjc.2013.09.034
21. Mohammed, M. Y., Albayati, T. M., Ali, A. M. Imidazolium-based ionic liquids for extraction of sulfur compounds from real heavy crude oil. Chemistry Africa, 2022, 5, 1715–1722.
https://doi.org/10.1007/s42250-022-00447-9
22. Lo, W.-H., Yang, H.-Y., Wei, G.-T. One-pot desulfurization of light oils by chemical oxidation and solvent extraction with room temperature ionic liquids. Green Chemistry, 2003, 5(5), 639–642.
https://doi.org/10.1039/B305993F
23. Al-Ayed, O. S. Variable reaction order for kinetic modeling of oil shale pyrolysis. Oil Shale, 2011, 28(2), 296–308.
https://doi.org/10.3176/oil.2011.2.04
24. Huang, C., Chen, B., Zhang, J., Liu, Z., Li, Y. Desulfurization of gasoline by extraction with new ionic liquids. Energy & Fuels, 2004, 18(6), 1862–1864.
https://doi.org/10.1021/ef049879k
25. Player, L. C., Chan, B., Lui, M. Y., Masters, A. F., Maschmeyer, T. Toward an understanding of the forces behind extractive desulfurization of fuels with ionic liquids. ACS Sustainable Chemistry & Engineering, 2019, 7(4), 4087−4093.
https://doi.org/10.1021/acssuschemeng.8b05585
26. Lui, M. Y., Cattelan, L., Player, L. C., Masters, A. F., Perosa, A., Selva, M. et al. Extractive denitrogenation of fuel oils with ionic liquids: a systematic study. Energy & Fuels, 2017, 31(3), 2183−2189.
https://doi.org/10.1021/acs.energyfuels.6b02157
27. Slattery, J. M., Daguenet, C., Dyson, P. J., Schubert, T. J. S., Krossing, I. How to predict the physical properties of ionic liquids: a volume-based approach. Angewandte Chemie: International Edition, 2007, 46(28), 5384−5388.
https://doi.org/10.1002/anie.200700941
28. Haruna, A., Merican, Z. A., Juma, A. K., Aliero, A. S., Ekeoma, B. C., Abdullahi, M. et al. Fuel desulfurization using ionic liquids – an updated review. Journal of Ionic Liquids, 2025, 5(2), 100162.
https://doi.org/10.1016/j.jil.2025.100162
29. Raj, J. J., Magaret, S., Pranesh, M., Lethesh, K. C., Devi, W. C., Mutalib, M. I. A. Dual functionalized imidazolium ionic liquids as a green solvent for extractive desulfurization of fuel oil: toxicology and mechanistic studies. Journal of Cleaner Production, 2019, 213, 989–998.
https://doi.org/10.1016/j.jclepro.2018.12.207
30. Solouki, A., Chaouki, J. Extractive desulfurization of crude petroleum oil and liquid fuels using trihexyl tetradecyl phosphonium bis(2-ethylhexyl) phosphate ionic liquid. Chemical Product and Process Modeling, 2024, 19(2), 263–273.
https://doi.org/10.1515/cppm-2023-0077
31. Hosseini, A., Khoshsima, A., Sabzi, M., Rostam, A. Toward application of ionic liquids to desulfurization of fuels: a review. Energy & Fuels, 2022, 36(8), 4119–4152.
https://doi.org/10.1021/acs.energyfuels.1c03974
32. Tomida, D., Kumagai, A., Qiao, K., Yokoyama, C. Viscosity of [bmim][PF6] and [bmim][BF4] at high pressure. International Journal of Thermophysics, 2006, 27(1), 39–47.
https://doi.org/10.1007/s10765-006-0020-y
33. Adeyemi, M. A. Analysis of sulfur content in selected crude oils in the world. In Contemporary Developments in Hydraulic Fracturing (Eshiet, K. ed.). IntechOpen, 2024,
https://www.intechopen.com/chapters/89343 (accessed 2026-07-07).
