ESTONIAN ACADEMY
PUBLISHERS
eesti teaduste
akadeemia kirjastus
PUBLISHED
SINCE 1984
 
Oil Shale cover
Oil Shale
ISSN 1736-7492 (Electronic)
ISSN 0208-189X (Print)
Impact Factor (2024): 1.4
Research article
Well pattern-controlled heat transfer in in-situ oil shale conversion: a review of numerical modeling; pp. 280–299
PDF | https://doi.org/10.3176/oil.2026.3.03

Authors
Yu Cao, Yi Pan, Shuangchun Yang, Hui Yang
Abstract

As an important alternative to conventional oil and gas resources, oil shale holds significant strategic importance. While in-situ conversion technology has addressed the challenges of deep oil shale mining, heat transfer efficiency remains the core bottleneck for its large-scale application. Through a systematic review of heat transfer simulation studies on oil shale in-situ conversion under well pattern control, this paper fills existing research gaps. It first systematically reviews the current research status of heat transfer during oil shale in-situ conversion, then clarifies the heat transfer mechanisms, and finally elaborates on the thermal-hydraulic-mechanical coupling model and research progress in in-situ extraction under well pattern control. It provides theoretical support for well pattern design and efficient mining in oil shale in-situ conversion projects.

References

1. Al-Gharabli, S. I., Azzam, M. O. J., Al-Addous, M. Microwave-assisted solvent extraction of shale oil from Jordanian oil shale. Oil Shale, 2015, 32(3), 240–251.
https://doi.org/10.3176/oil.2015.3.04

2. Yihdego, Y., Salem, H. S., Kafui, B. G., Veljkovic, Z. Economic geology value of oil shale deposits: Ethiopia (Tigray) and Jordan. Energy Sources Part A: Recovery, Utilization, and Environmental Effects, 2018, 40(17), 2079–2096.
https://doi.org/10.1080/15567036.2018.1488015

3. Kong, D., Meng, X., Zhu, J., Zhou, W. Molecular dynamics simulation of surfactant induced wettability alteration of shale reservoirs. Frontiers in Energy Research, 2023, 11, 1272132.
https://doi.org/10.3389/fenrg.2023.1272132

4. Publisher’s note. Energy Reports, 2022, 8(S13), 1099–1112.
https://doi.org/10.1016/j.egyr.2022.08.174

5. Wang, L., Yang, D., Kang, Z., Zhao, J., Meng, Q. Experimental study on the effects of steam temperature on the pore-fracture evolution of oil shale exposed to the convection heating. Journal of Analytical and Applied Pyrolysis, 2022, 164, 105533.
https://doi.org/10.1016/j.jaap.2022.105533

6. Wang, L., Yang, D., Li, X., Zhao, J., Wang, G., Zhao, Y. Macro and meso characteristics of in-situ oil shale pyrolysis using superheated steam. Energies, 2018, 11(9), 2297.
https://doi.org/10.3390/en11092297

7. Bai, F., Sun, Y., Liu, Y., Guo, M. Evaluation of the porous structure of Huadian oil shale during pyrolysis using multiple approaches. Fuel, 2017, 187, 1–8.
https://doi.org/10.1016/j.fuel.2016.09.012

8. Kang, Z., Zhao, Y., Yang, D. Review of oil shale in-situ conversion tech-no-logy. Applied Energy, 2020, 269, 115121.
https://doi.org/10.1016/j.apenergy.2020.115121

9. Hou, L., Tian, H., Yu, Z., Zhao, Z., Wu, S., Li, X. Dynamic evolution mechanism of reservoir physical properties during oil shale in situ conversion. Energy & Fuels, 2024, 38(10), 8631–8640.
https://doi.org/10.1021/acs.energyfuels.4c00141

10. Jiang, T., Yang, L., Zhu, C. Effect of pressure on the oil shale convection heating in-situ conversion process. International Journal of Thermal Sciences, 2025, 214, 109940.
https://doi.org/10.1016/j.ijthermalsci.2025.109940

11. Wang, C., Liu, Y., Song, D., Xu, J., Wang, Q., Zhang, S. Evaluation of bedding effect on the bursting liability of coal and coal-rock combination under different bedding dip angles. Advances in Geo-Energy Research, 2024, 11(1), 29–40.
https://doi.org/10.46690/ager.2024.01.04

12. Sun, Y., He, L., Kang, S., Guo, W., Li, Q., Deng, S. Pore evolution of oil shale during sub-critical water extraction. Energies, 2018, 11(4), 842.
https://doi.org/10.3390/en11040842

13. Liu, Z., Ma, H., Guo, J., Liu, G., Wang, Z., Guo, Y. Pyrolysis characteristics and effect on pore structure of Jimsar oil shale based on TG-FTIR-MS analysis. Geofluids, 2022, 7857239.
https://doi.org/10.1155/2022/7857239

14. Wang, C.-Y. Measurements, mechanisms, and models of heat transport: by A. M. Hofmeister, Elsevier, 2018. Contemporary Physics, 2020, 61(4), 303–304.
https://doi.org/10.1080/00107514.2020.1853240

15. Mandal, I., Pal, S. COVID-19 pandemic persuaded lockdown effects on environment over stone quarrying and crushing areas. Science of The Total Environment, 2020, 732, 139281.
https://doi.org/10.1016/j.scitotenv.2020.139281

16. Metwally, H., Mahmoud, N. A., Aboelsoud, W., Ezzat, M. Yearly performance of the photovoltaic active cooling system using the thermoelectric generator. Case Studies in Thermal Engineering, 2021, 27, 101252.
https://doi.org/10.1016/j.csite.2021.101252

17. Pan, Y., Jia, Y., Zheng, J., Yang, S., Bttina, H. Research progress of fracture development during in-situ cracking of oil shale. Journal of Analytical and Applied Pyrolysis, 2023, 174, 106110.
https://doi.org/10.1016/j.jaap.2023.106110

18. Jiang, H., Liu, S., Wang, J., You, Y., Yuan, S. Study on evolution mechanism of the pyrolysis of Chang 7 oil shale from Ordos basin in China. Energy, 2023, 272, 127097.
https://doi.org/10.1016/j.energy.2023.127097

19. Bu, Q., Li, Q., Li, X. Numerical heat transfer simulation of oil shale large-size downhole heater. Applied Sciences, 2024, 14(6), 2235.
https://doi.org/10.3390/app14062235

20. Jia, Y., Huang, X., Yang, D., Sun, D., Luo, C. Thermo-hydro-mechanical coupling in oil shale: investigating permeability and heat transfer under high-temperature steam injection. Case Studies in Thermal Engineering, 2024, 61, 104862.
https://doi.org/10.1016/j.csite.2024.104862

21. Jin, J., Liu, J., Jiang, W., Cheng, W., Zhang, X. Evolution of the anisotropic thermal conductivity of oil shale with temperature and its relationship with anisotropic pore structure evolution. Energies, 2022, 15(21), 8021.
https://doi.org/10.3390/en15218021

22. Zhang, F., Parker, J. C. An efficient modeling approach to simulate heat transfer rate between fracture and matrix regions for oil shale retorting. Transport in Porous Media, 2010, 84, 229–240.
https://doi.org/10.1007/s11242-009-9495-x

23. Di Maio, F. P., Di Renzo, A., Trevisan, D. Comparison of heat transfer models in DEM-CFD simulations of fluidized beds with an immersed probe. Powder Technology, 2009, 193(3), 257–265.
https://doi.org/10.1016/j.powtec.2009.03.002

24. Wang, L., Yang, D., Zhang, Y., Li, W., Kang, Z., Zhao, Y. Research on the reaction mechanism and modification distance of oil shale during high-temperature water vapor pyrolysis. Energy, 2022, 261, 125213.
https://doi.org/10.1016/j.energy.2022.125213

25. Wang, X., Huang, L., Li, X., Bi, S., Li, H., Zhang, J. et al. Wellbore multiphase flow behaviors of gas kick in deep water horizontal drilling. Frontiers in Physics, 2022, 10, 1049547.
https://doi.org/10.3389/fphy.2022.1049547

26. Wu, Z., Fang, F., Li, X., Xiao, H., Liu, X., Rao, Y. et al. Division method and seepage law of seepage channels in a tight reservoir. Geofluids, 2021, 4804513.
https://doi.org/10.1155/2021/4804513

27. Huang, H., Yu, H., Xu, W., Lyu, C., Micheal, M., Xu, H. et al. A coupled thermos-hydro-mechanical-chemical model for production performance of oil shale reservoirs during in-situ conversion process. Energy, 2023, 268, 126700.
https://doi.org/10.1016/j.energy.2023.126700

28. Yin, T., Wu, Y., Li, Q., Wang, C., Wu, B. Determination of double-K fracture toughness parameters of thermally treated granite using notched semi-circular bending specimen. Engineering Fracture Mechanics, 2020, 226, 106865.
https://doi.org/10.1016/j.engfracmech.2019.106865

29. Li, W., Liu, J., Zeng, J., Leong, Y.-K., Elsworth, D., Tian, J. et al. A fully coupled multidomain and multiphysics model for evaluation of shale gas extraction. Fuel, 2020, 278, 118214.
https://doi.org/10.1016/j.fuel.2020.118214

30. Wang, H., Li, X., Zhu, J., Yang, Z., Zhou, J., Yi, L. Numerical simulation of oil shale pyrolysis under microwave irradiation based on a three-dimensional porous medium multiphysics field model. Energies, 2022, 15(9), 3256.
https://doi.org/10.3390/en15093256

31. Zhu, J., Yi, L., Yang, Z., Duan, M. Three-dimensional numerical simulation on the thermal response of oil shale subjected to microwave heating. Chemical Engineering Journal, 2021, 407, 127197.
https://doi.org/10.1016/j.cej.2020.127197

32. Chen, X., Rao, X., Xu, Y., Liu, Y. An effective numerical simulation method for steam injection assisted in situ recovery of oil shale. Energies, 2022, 15(3), 776.
https://doi.org/10.3390/en15030776

33. Liu, Y., Xue, L., Bai, F., Zhao, J., Yan, Y. Three-dimensional numerical simulation of hydrocarbon production and reservoir deformation of oil shale in situ conversion processing using a downhole burner. ACS Omega, 2022, 7(27), 23695–23707.
https://doi.org/10.1021/acsomega.2c02317

34. Ramsay, T. Uncertainty quantification of an explicitly coupled multiphysics simulation of in-situ pyrolysis by radio frequency heating in oil shale. SPE Journal, 2020, 25(3), 1443–1461.
https://doi.org/10.2118/200476-PA

35. Lu, Y.-C., Song, S.-R., Taguchi, S., Wang, P.-L., Yeh, E.-C., Lin, Y.-J. et al. Evolution of hot fluids in the Chingshui geothermal field inferred from crystal morphology and geochemical vein data. Geothermics, 2018, 74, 305–318.
https://doi.org/10.1016/j.geothermics.2017.11.016

36. Yu, H., Tang, J., Zhang, X., Ren, L., Zhang, X. Analysis of effective pyrolysis zone and heat loss in oil shale reservoir with random fractures. ACS Omega, 2023, 8(48), 45687–45699.
https://doi.org/10.1021/acsomega.3c06014

37. Nie, B. Study on thermal decomposition of oil shale: two-phase fluid simulation in wellbore. Energy, 2023, 272, 127124.
https://doi.org/10.1016/j.energy.2023.127124

38. Briceño Montilla, M. J., Li, S., Zhang, Z., Hu, Y., He, J., Bo, Z. et al. Energy recovery analysis through numerical simulations of steam injection in continental shale oil reservoirs. Journal of Petroleum Exploration and Production Technology, 2025, 15, 69.
https://doi.org/10.1007/s13202-025-01970-4

39. Jia, B., Huang, Z. Oil shale in situ production using a novel flow-heat coupling approach. ACS Omega, 2024, 9(7), 7705–7718.
https://doi.org/10.1021/acsomega.3c07009

40. Ren, S., Jia, Y., Zhao, J., Yang, D., Wang, G. Numerical study on in-situ mining oil shale by high-temperature steam injection in long-distance horizontal wells. Geomechanics and Geophysics for Geo-Energy and Geo-Resources, 2024, 10, 161.
https://doi.org/10.1007/s40948-024-00869-4

41. Sun, T., Liu, H., Zhang, Y., Li, Y. Numerical simulation and optimization study of in-situ heating for three-dimensional oil shale exploitation with different well patterns. Case Studies in Thermal Engineering, 2024, 55, 104089.
https://doi.org/10.1016/j.csite.2024.104089

42. Pei, S., Wang, Y., Zhang, L., Huang, L., Cui, G., Zhang, P. et al. An innovative nitrogen injection assisted in-situ conversion process for oil shale recovery: mechanism and reservoir simulation study. Journal of Petroleum Science and Engineering, 2018, 171, 507–515.
https://doi.org/10.1016/j.petrol.2018.07.071

43. Song, X., Zhang, C., Shi, Y., Li, G. Production performance of oil shale in-situ conversion with multilateral wells. Energy, 2019, 189, 116145.
https://doi.org/10.1016/j.energy.2019.116145

Back to Issue