, Yubaodan Sun, Ninging Li, Yue Yue, Haodan Pan, Zhiyong Hu, Lei ZhaoTo enhance heat transfer between shale ash and oil shale particles in a rotary retorting furnace, this study coupled the discrete element method (DEM) with a particle heat conduction model to simulate mixing and heat transfer, examining the effects of particle filling ratio, furnace rotational speed, and baffle structures. A backpropagation neural network (BP-NN) model was built from simulation data to map furnace operation time with key parameters, and a genetic algorithm was used to optimize parameters to minimize operation time. The research results show that lower filling degrees and higher rotation speeds significantly strengthen particle mixing and heat exchange, which accelerate the system’s stabilization, improve temperature field uniformity, and reduce the temperature standard deviation. The mixing and heat transfer effect of the straight baffle is between that of the right-angle baffle and the inclined baffle, but it causes the largest temperature standard deviation. In contrast, the right-angle baffle demonstrates stronger advantages in heat transfer uniformity during particle lifting and throwing. The constructed BP-NN prediction model achieves a relative error accuracy within 0.25%, effectively solving the long computation time problem of DEM simulation. The optimized parameter combination provides a theoretical basis for the development of high-efficiency and energy-saving rotary retorting furnaces.
1. Chen, B., Wu, J., Zhang, Y. Data-driven analysis and insights into sorption-induced kerogen deformation in shale. Gas Science and Engineering, 2025, 136, 205579.
https://doi.org/10.1016/j.jgsce.2025.205579
2. Yin, X., Cao, Z., Cao, C., Lü, N. Simulation and optimization in shale oil condensation recovery system. Journal of Petrochemical Universities, 2019, 32(3), 20–27.
https://doi.org/10.3969/j.issn.1006-396X.2019.03.004
3. Jia, B., Su, J. Advancements and environmental implications in oil shale exploration and processing. Applied Sciences, 2023, 13(13), 7657.
https://doi.org/10.3390/app13137657
4. Guo, C., Zou, T., Pan, H., Lu, H., Hu, H. Effect of transition metal salt catalysts on pyrolysis of Fushun oil shale. Journal of Liaoning Petrochemical University, 2021, 41(3), 15–22.
https://doi.org/10.3969/j.issn.1672-6952.2021.03.003
5. Ma, Y., Xiang, Q., Ding, K. Development of oil shale at home and abroad. World Petroleum Industry (China), 2024, 31(1), 16–25.
https://doi.org/10.20114/j.issn.1006-0030.20231108001
6. Li, J. Simulation Research on Particle Heat Transfer Process in a Solid Heat Carrier Rotary Retorting for Oil Shale. Master’s thesis. Northeast Electric Power University, China, 2018.
7. Zhang, L., Wei, Q., Wang, Q. Influence of flights’ shape on motion and mixing of binary particles in rotary retort. Journal of Zhejiang University (Engineering Science), 2018, 52(8), 1542–1550.
https://doi.org/10.3785/j.issn.1008-973X.2018.08.014
8. Li, S., Zhang, L., Zhang, X., Yu, K., Wang, Q., Hao, W. Numerical analysis of particle mixing and movement in rotary retorting. Proceedings of the CSEE, 2011, 31(2), 32–38.
9. Bisulandu, B.-J. R. M., Huchet, F. Rotary kiln process: an overview of physical mechanisms, models and applications. Applied Thermal Engineering, 2023, 221, 119637.
https://doi.org/10.1016/j.applthermaleng.2022.119637
10. Seidenbecher, J., Herz, F., Meitzner, C., Specht, E., Wirtz, S., Scherer, V. et al. Experimental analysis of the flight design effect on the temperature distribution in rotary kilns. Chemical Engineering Science, 2021, 240, 116652.
11. He, Y., E, D., Lai, N. C., Jiang, Z. Influence of flight structures and baffle dam on particle behaviors and gas-solid heat exchange enhancement in a rotary drum. Particuology, 2025, 102, 104–117.
https://doi.org/10.1016/j.partic.2025.04.010
12. Zhang, L., Li, S., Yu, K., Zhang, X., Wang, Q. Cold experiments on mixing performance of oil shale particle and solid heat carrier in rotary retorting. Chemical Industry and Engineering Progress, 2011, 30(3), 492–497.
13. Herz, F., Mitov, I., Specht, E., Stanev, R. Influence of operational parameters and material properties on the contact heat transfer in rotary kilns. International Journal of Heat and Mass Transfer, 2012, 55(25–26), 7941–7948.
https://doi.org/10.1016/j.ijheatmasstransfer.2012.08.022
14. Liang, R., Zhang, Z., Jin, Z., Yu, X., Zhang, S. Engineering application of indirect heating rotary kiln in oil shale pyrolysis treatment. Chinese Journal of Environmental Engineering, 2021, 15(9), 3029–3034.
15. Nabilah, A. J., Satritama, B., Hidayat, T., Taskinen, P., Santoso, I., Kurniadani, H. et al. Reduction of saprolite nickel ore using methane-argon gas mixture with laboratory-scale simulated rotary kiln-electric furnace (RKEF) technology. Minerals Engineering, 2025, 234, 109776.
https://doi.org/10.1016/j.mineng.2025.109776
16. Li, J., Sun, T., Wen, L. Multi-objective evaluation of optimization of direct evaporative cooling air supply mode in rotary kiln process section. Refrigeration and Air Conditioning, 2025, 39(1), 56–65.
17. Hu, J., Zhang, L., Wang, B., Kisuka, F., He, Y., Wang, Z. et al. A robust DEM framework for efficient simulation of heat generation in long-duration recurrent granular flows. Powder Technology, 2025, 465, 121308.
https://doi.org/10.1016/j.powtec.2025.121308
18. Wu, H., Li, W., Wang, J., Zhan, M., Gu, H., Xu, P. et al. Drying characteristics of soil in large-scale rotary kilns: an experimental and CFD-DEM study. Drying Technology, 2025, 43(3), 527–540.
https://doi.org/10.1080/07373937.2024.2436505
19. Arntz, M. M. H. D., den Otter, W. K., Briels, W. J., Bussmann, P. J. T., Beeftink, H. H., Boom, R. M. Granular mixing and segregation in a horizontal rotating drum: a simulation study on the impact of rotational speed and fill level. AIChE Journal, 2010, 54(12), 3133–3146.
https://doi.org/10.1002/aic.11622
20. Wang, Q., Li, J., Wang, Z., Zhang, L. Numerical simulation on characteristics of heat transfer between particles in rotary retorting. CIESC Journal, 2017, 68(11), 4137–4146.
https://doi.org/10.11949/j.issn.0438-1157.20170147
21. Wang, Q., Liu, B. W., Wang, Z. C. Investigation of heat transfer mechanisms among particles in horizontal rotary retorts. Powder Technology, 2020, 367, 82–96.
https://doi.org/10.1016/j.powtec.2020.03.042
22. Xie, Q., Chen, Z. B., Hou, Q. F., Yu, A. B., Yang, R. DEM investigation of heat transfer in a drum mixer with lifters. Powder Technology, 2017, 314, 175–181.
https://doi.org/10.1016/j.powtec.2016.09.022
23. Wang, M., Chen, E., Liu, P., Guo, W. Multivariable nonlinear predictive control of a clinker sintering system at different working states by combining artificial neural network and autoregressive exogenous. Advances in Mechanical Engineering, 2020, 12(1), 1687814019896509.
https://doi.org/10.1177/1687814019896509
24. Li, T., Zhang, Z., Chen, H. Predicting the combustion state of rotary kilns using a convolutional recurrent neural network. Journal of Process Control, 2019, 84, 207–214.
https://doi.org/10.1016/j.jprocont.2019.10.009
25. Ko, M. S., Chang, T. B., Lee, C. Y., Huang, J. W., Lim, C. F. Optimization of cyclone-type rotary kiln reactor for carbonation of BOF slag. Sustainability, 2021, 13(20), 11556.
https://doi.org/10.3390/su132011556
26. Zhang, R. F. Research on State Recognition and Intelligent Optimization Method of Cement Clinker Calcination Process. PhD thesis. University of Jinan, China, 2023.
27. Wang, C., Sun, Y., Wang, N., Sun, J., Yue, Y. Study on the influence of baffles on heat transfer characteristics of particles in an oil shale rotary kiln. Applied Thermal Engineering, 2025, 268, 125924.
https://doi.org/10.1016/j.applthermaleng.2025.125924
28. Zhou, Z. Y., Yu, A. B., Zulli, P. Particle scale study of heat transfer in packed and bubbling fluidized beds. AIChE Journal, 2009, 55(4), 868–884.
https://doi.org/10.1002/aic.11823
29. Chaudhuri, B., Muzzio, F. J., Tomassone, M. S. Modeling of heat transfer in granular flow in rotating vessels. Chemical Engineering Science, 2006, 61(19), 6348–6360.
https://doi.org/10.1016/j.ces.2006.05.034
30. Nafsun, A. I., Herz, F., Liu, X. Influence of material thermal properties and dispersity on thermal bed mixing in rotary drums. Powder Technology, 2018, 331, 121–128.
https://doi.org/10.1016/j.powtec.2018.01.072
31. Kant, R., Maurya, S. P., Singh, K. H. Qualitative and quantitative reservoir characterization using seismic inversion based on particle swarm optimization and genetic algorithm: a comparative case study. Scientific Reports, 2024, 14(1), 22581.
https://doi.org/10.21203/rs.3.rs-3141822/v1
32. Michailidis, P., Michailidis, I., Kosmatopoulos, E. Reinforcement learning for optimizing renewable energy utilization in buildings: a review on applications and innovations. Energies, 2025, 18(7), 1724.
https://doi.org/10.3390/en18071724
33. Jin, L., Duan, J., Fan, T., Jiao, P., Dong, T., Wu, Q. Using GA-BP coupling algorithm to predict the high-performance concrete mechanical property. KSCE Journal of Civil Engineering, 2023, 27(2), 684–697.
https://doi.org/10.1007/s12205-022-0912-9
