EAP - Oil Shale publications

PUBLISHED
SINCE 1984

Oil Shale

ISSN 1736-7492 (Electronic)
ISSN 0208-189X (Print)

Open Access Journal

CiteScore: 2.6

Impact Factor (2022): 1.9

TECHNIQUE OF PREPARING MODIFIED SILICA FROM OIL SHALE RESIDUE; pp. 309–320

PDF | doi: 10.3176/oil.2011.2.05

Authors

XU YING-MEI, QI JI, SHI JIA-WEI, HE DE-MIN, WANG DONG-MEI, ZHANG QIU-MIN

Abstract

The raw material – residue of oil production from Huadian oil shale – was modified with cationic surfactants; the hydroxyl groups on the aggregated silica surface were alkylated directly. The structure of alkylated Si-hydroxyl on modified silica surface was characterized by means of infrared spectroscopy, nuclear magnetic resonance analysis, thermal gravimetric analysis and scanning electron microscopy analysis. The results showed that modification rate of hydroxyl groups on the surface of the modified silica obtained was about 84%. The modification conditions were optimized basing on application of the orthogonal experimental method, and the optimum parameters were as follows: the reaction temperature of water medium – 40 °C, pH value within the range of 9–10, and the molar ratio of cationic surfactant to silica hydroxyl on the surface – 2:1.

References

1. Li Shuyuan, Qian Jialin, Wang Jianqiu. 27th International Oil Shale Conference summary report // Chinese Journal of Oil Shale. 2007. No. 5. P. 22–27 [in Chinese].

2. Wang Dong-mei, Xu Ying-mei, He De-min, Guan Jun, Zhang Oiu-min. Investigation of mineral composition of oil shale // Asia-Pac. J. Chem. Eng. 2009. Vol. 4, No. 5. P. 691–697.

3. Reinik, J., Heinmaa, J., Mikkola, J.-P., Kordás, K., Kirso, U. Synthesis of calcium-alumino-silicate hydrates from oil shale ash in different alkaline media // Oil Shale. 2010. Vol. 27, No. 1. P. 47–57.

4. Reinik, J., Heinmaa, I., Mikkola, J.-P., Kirso, U. Synthesis and characterization of calcium–alumino-silicate hydrates from oil shale ash – Towards industrial applications // Fuel. 2008. Vol. 87, No. 10–11. P. 1998–2003.

5. Reinik, J., Heinmaa, I., Mikkola, J.-P., Kirso, U. Hydrothermal alkaline treatment of oil shale ash for synthesis of tobermorites // Fuel. 2007. Vol. 86,
No. 5–6. P. 669–676.

6. Xu Ying-mei, He De-min, Wang Dong-mei, Lian Yu-huan, Guan Jun, Zhang Qiu-min. Influence of calcination temperature on leaching rate of aluminum and iron impurities in oil shale ash // Oil Shale. 2009. Vol. 26, No. 2. P. 163–168.

7. Xu Ying-mei, He De-min, Jiang Hui-ming, Lian Yu-huan, Zhang Wei, Guan Jun, Zhang Qiu-min. Characterization of oil shale processing residues and separated products // Oil Shale. 2009. Vol. 26, No. 4. P. 500–512.

8. Feng Zong-yu, Li Yong, Xue Xiang-xin, He Yan, Liu Ping-xian. Preparation of alumina and silica white from oil shale residue // Mining and Metallurgical Engineering. 2008. Vol. 28, No. 4. P. 53–57 [in Chinese].

9. Trikkel, A., Kuusik, R., Maljukova, N. Distribution of organic and inorganic ingredients in Estonian oil shale semicoke // Oil Shale. 2004. Vol. 21, No. 3. P. 227–236.

10. Wang Qing, Bai Jingru, Sun Baizhong, Sun Jian. Strategy of Huadian oil shale comprehensive utilization // Oil Shale. 2005. Vol. 22, No. 3. P. 305–316.

11. You Jun-jun, Ye Song-qing, Liu Zhao-jun, Wang Yun-zhe. Comprehensive development and utilization of oil shale // Geology of the World. 2004. Vol. 24, No. 3. P. 251–256 [in Chinese].

12. Arro, H., Prikk, A., Pihu, T., Öpik, I. Utilization of semi-coke of Estonian shale oil industry // Oil shale. 2002. Vol. 19, No. 2. P. 117–125.

13. Li Yong, Xue Xiang-xin, Feng Zong-yu. Preparation of precipitated silica from oil shale residue // Journal of Process Engineering. 2007. Vol. 7, No. 4. P. 751–754 [in Chinese].

14. Gao Gui-mei, Zou Hai-feng, Gan Shu-cai, Liu Zhao-jun, An Bai-chao, Xu
Ji-jing, Li Guang-huan. Preparation and properties of silica nanoparticles from oil shale ash // Powder Technol. 2009. Vol. 191, No. 1–2. P. 47–51.
doi:10.1016/j.powtec.2008.09.006

15. Tang Hong-bo, Zhang Xin-meng, Ma Bing-jie, Zhong Yu-hua. Modification technology of nano-silica using hexamethyldisilazane // Journal of Shenyang University of Technology. 2007. Vol. 29, No. 6. P. 663–666 [in Chinese].

16. Jesionowski, T., Bula, K., Janiszewski, J., Jurga, J. The influence of filler modification on its aggregation and dispersion behaviour in silica/PBT composite // Compos. Interface. 2003. Vol. 10, No. 2–3. P. 225–242 .

17. Yao Ying. Study of the influence about surface active agent to carbonation white carbon // Tianjin Chemical Industry. 2006. Vol. 20, No. 4. P. 36–37 [in Chinese].

18. Ouyang Zhao-hui, Wu Lin, Li Kong-biao, Cao Shuchao, Wang Yan. Surface modification of nano-SiO₂ in gas phase //Chemical Industry and Engineering Progress. 2005. Vol. 24, No. 11. P. 1265–1268 [in Chinese].

19. Zurawska, J., Krysztafkiewicz, A., Jesionowski, T. Effect of ammonium salts on dispersive and adsorptive parameters of silicas precipitated from sodium metasilicate solution // Colloid. Surface. A. 2003. Vol. 223, No. 1–3. P. 201–214.
doi:10.1016/S0927-7757(03)00192-4

20. Yu Xin-wei, Chen Yao. Surface modification technology of silica // Journal of Guangzhou University. 2002. Vol. 1, No 6. P. 12–16 [in Chinese].

21. Xu Ying-mei, Qi Ji, He De-min, Wang Dong-mei, Chen Hui-ying, Guan Jun, Zhang Qiu-min. Preparation of amorphous silica from oil shale residue and surface modification by silane coupling agent // Oil Shale. 2010. Vol. 27, No. 1. P. 37–46.

Back to Issue