ESTONIAN ACADEMY
PUBLISHERS
eesti teaduste
akadeemia kirjastus
cover
Estonian Journal of Engineering
On non-destructive residual stress measurement in glass panels; pp. 150–156
PDF | doi: 10.3176/eng.2010.2.04

Authors
Marko Lamp, Helina Klaassen, Siim Hödemann, Jaak Kikas, Andrei Errapart, Johan Anton, Hillar Aben
Abstract
A portable scattered light polariscope SCALP has been developed, which permits measurement of the residual stress profile through the thickness of glass panels. At a glass factory strength assessment of glass panels of different thermal treatment was carried out using both residual stress measurement with SCALP and the traditional four-point bending tests. Linear correlation between the residual surface stress and the bending strength was observed. At another glass factory residual stress in glass panels was measured before performing the traditional fragmentation test. The results of the fragmentation test were extremely scattered and had almost no correlation with the values of the residual stress. It is concluded that sufficiently reliable assessment of the strength of glass panels is obtained by measuring the residual stress at the surface.
References

1. Schiavonato, M., Mognato, E. and Redner, A. S. Stress measurement, fragmentation and mechanical strength. In Proc. International Conference “Glass Processing Days 2005”. Tampere, Finland, 2005, 92–95.

2. Faingold, J. M. Non-destructive instruments offer stress relief to glass fabricators to test for mechanical strength and impact resistance. Verre, 2005, No. 2, 66–69.

3. Carré, H. and Daudeville, L. Analysis of residual stresses and of the load-bearing capacity of tempered glass plates. In Proc. 4th European Conference on Residual Stresses. Cluny en Bourgogne, 1996, 377–386.

4. Dubru, M., Nugue, J.-C. and Lummen, G. Toughened glass: mechanical properties and EN 12600 behaviour. In Proc. International Conference “Glass Processing Days 2005”. Tampere, Finland, 2005, 1–5.

5. Rodichev, Y., Maslov, V., Netychuk, A., Bodunov, V. and Yevplov, Y. Bending strength and fracture of glass materials under the different loading conditions. In Proc. International Conference “Glass Performance Days 2007”. Tampere, Finland, 2007, 615–618.

6. Weissmann, R. and Dürkop, D. A novel method for measuring stresses in flat glass. In Proc. XV International Congress on Glass. Leningrad, 1989, 3b, 217–220.

7. Hundhammer, I., Lenhart, A. and Pantasch, D. Stress measurement in transparent materials using scattered laser light. Glass Sci. Technol., 2002, 75, 236–242.

8. Lochegnies, D., Romero, E., Anton, J., Errapart, A. and Aben, H. Measurement of complete residual stress fields in tempered glass plates. In Proc. International Conference “Glass Processing Days 2005”. Tampere, Finland, 2005, 88–91.

9. Overend, M., De Gartano, S. and Haldimann, M. Diagnostic interpretation of glass failure. Structural Eng. Int., 2007, No. 2, 151–158.
doi:10.2749/101686607780680790
Back to Issue

Back issues